Technicolor Thomson Conference Phone EX29350 User Manual

7. Plug the telephone line cord into the modular jack and  
into the TEL. LINE jack on the back of the base.  
LOCAL AREA CODE SETTING  
INTRODUCTION  
Model EX29350  
Spea kerphone  
User s Guide  
1. Press MENUbutton, LCD displays set 1 date.  
2. Press < or > button, LCD displays set 2 code.  
3. Press MENUbutton to enter local area code setting.  
4. Press 0~9 button to input local area code.  
5. Press DELbutton to save the setting and exit setting  
mode.  
Your Caller ID phone stores and displays specific  
information, provided by your local telephone company, to  
subscribers of Caller ID or similar caller identification  
services. You must subscribe to one of these services in  
order to use this unit.  
NOTE: The phone automatically defaults to touch-tone dialing.  
To change to pulse (rotary) dialing, see "Tone/Pulse Dialing". If  
you don't know which type of service you have, check with the  
phone company.  
Your Caller ID phone enables you to:  
Identify callers before you answer the phone.  
Record up to 60 Caller ID messages sequentially.  
Know who called while you were away.  
To get the most from your new phone, we suggest that  
you take a few minutes right now to read through this  
users guide.  
RINGER LEVEL SETTING  
There are total 3 ring levels. (HI/MID/LO)  
Move ring volume switch in the back of the base to set  
Ringer level.  
LCD Display Icons  
1.  
: SPEAKERPHONE  
2.  
: LOW BATTERY INDICATOR  
3. MUTE : MUTE  
RECEIVE VOLUME  
4.  
: NUMBER OF CALLS  
IMPORTANT: In order to use this unit, you must subscribe to  
either the standard Number Caller ID Service.  
There are total 3 receive volume levels. (HI/MID/LO)  
While on the phone, press the VOLbutton to adjust the  
receive volume of handset or speaker.  
5. NEW : NEW CID  
6.  
: VOICE MAIL  
7. REP : REPEAT  
(Volume Lodisplays “ ”, Middisplays “  
displays “ ”.)  
, Hi”  
8.  
9.  
: TIME  
DATE  
BEFORE YOU BEGIN  
:
M
D
PARTS CHECKLIST  
10. AM : MORNING  
FLASH TIME SETTING  
Make sure your package includes the items:  
11. PM : AFTERNOON  
There are three flash timings for selection.  
1.  
2.  
3.  
4.  
Handset Coiled Cord  
Corded Handset  
Base  
Move the hard switch for selecting flash timing on the  
bottom to select proper flash timing .100ms ,300ms ,or  
600ms.  
FUNCTION KEY  
1. SPEAKER  
2. REDIAL  
3. VOL  
Telephone Line Cord  
MODULAR JACK REQUIREMENTS  
You need an RJ11 type modular phone jack, which is the  
most common type of phone jack. If you dont have a  
modular jack, call your local phone company to find out  
how to get one installed.  
4. CONTRAST  
5. STORE  
6. DIAL  
PHONE BASICS  
7. FLASH  
8. MUTE  
INSTALLING THE PHONE  
DESKTOP INSTALLATION  
9. DEL  
10. <REVIEW>  
11. MENU  
SET UP  
TONE/PULSE DIALING SELECTION  
Use a tooling to move T/P switch in the bottom to set  
dialing mode. (T: tone or P: pulse.)  
IN USE INDICATOR  
The IN USEindicator will light up when the phone is on the line.  
NOTE: The phone is shipped in Tone Dialing Mode from the  
SPEAKER INDICATOR  
The SPEAKER indicator will light up when the speaker is  
manufacturer.  
activated.  
1. Plug the coiled cord into the corded handset and the base.  
2. Push the switch on the battery door to unlock the  
FLASH TIME SETTING  
Using a tooling to move FLASH switch in the bottom to  
Thomson Asia Limited  
3/ F.,Delta House,3 On Yiu Street ,  
Siu Lek Yuen,Sha tin,Hong Kong  
RECEIVING A CALL  
1. Check the display to see who is calling.  
2. Press the SPEAKERbutton or pick up the handset to  
answer the phone.  
battery door.(Push the switch to  
position.)  
set FLASH timing. (100ms/300ms/600ms.)  
3. Remove the battery compartment door.  
is a tradema rk of Genera l Electic compa ny used under license  
to Thomson Inc.India na polis,IN 46290  
4. Insert 3 sized AA batteries. (Not include in package)  
The unit will be at its optimal performance provided that  
you have installed the 3 pieces AA sized dry batteries.  
5. Put the compartment door back on.  
DATEAND TIME SETTING  
3. Press the SPEAKERbutton again or put the handset  
on cradle to hang up.  
1. Press MENUbutton, LCD displays set 1 date.  
2. Press MENUbutton to enter date/time setting mode.  
3. Press 0~9 button to input the year, date and time.  
4. Press DELbutton to save the setting and exit setting  
MAKING A CALL  
6. Push the switch on the battery door to lock the battery  
door.(Push the switch to “ ”position.)  
To make a call, press the SPEAKERbutton or pick up  
 
mode.  

Technika Clock Radio DAB 109CRF User Manual
Thermo Products Impact Driver AH1 A User Manual
Thiel Audio Products Speaker SS2 User Manual
TIMEX Weather Products Outdoor Timer TM05 User Manual
Transcend Information Laptop TS32M 2GJF2B User Manual
Tricity Bendix Iron TIR2410 User Manual
Univex Universal Remote SRU3003WM User Manual
Viking Cooktop VDSC User Manual
VTech Baby Monitor DM221 User Manual
VTech Cordless Telephone t2453 User Manual