Technicolor Thomson MP3 Player RR420CD User Manual

EN  
 
Safety Information  
ADVARSEL!  
CAUTION!  
USYNLIG LASERSTRÅLNING VED ÅBNING NAR  
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.  
UNGDÅ UDSAETTELSE FOR STRÅLNING.  
EN  
Invisible laser radiation when open. Avoid exposure  
to beam. Class 1 laser product. This system must be  
opened only by qualified technicians to prevent acci-  
dents caused by the laser beam.  
VORSICHT!  
UNSICHTBARE LASERSTRALUNG  
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–  
VERRIEGELUNG ÜBERBRÜCKT.  
NICHT DEM LASERSTRAHL AUSSETZEN!  
LASER λ = 780nm, P max=5 mW  
CAUTION  
INVISIBLE LASER RADIATION  
Rating Information : At the bottom of the unit.  
This unit complies with the existing requirements.  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
ATTENTION  
RAYONNEMENT LASER INVISIBLE  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
In accordance with the rating plate of the  
unit, this unit current standards concern-  
ing electrical safety and electromagnetic  
compatibility.  
Please respect the environment  
Before throwing any batteries away, con-  
sult your distributor who may be able to  
take them back for specific recycling.  
VARNING–  
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.  
BETRAKTA EJ STRÅLEN.  
Have a Blast-Just Not in your eardrums  
Make sure you turn down the volume on  
the unit before you put on headphones.  
Increase the volume to the desired level  
VARO!  
AVAT TAESSA JA SOUJALUKITUS OHITETTAESSA  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.  
LASERSÄTEIL YLLE ÄLÄ KA TSO SÄTEESEEN.  
only after headphone are in place.  
CLASS  
LASER KLASSE  
APPAREIL A LASER DE CLASSE 1  
LUOKAN LASERLAITE  
KLASS LASERAPPARAT  
1
LASER PRODUCT  
1
1
1
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
T H E L I G H T N I N G  
FLASH AND ARROW-  
HEAD WITHIN THE  
CAUTION: TO REDUCE THE THE EXCLAMATION  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
TRIANGLE IS  
WA R N I N G S I G N  
ALERTING YOU OF  
D A  
A
WARNING  
SIGN  
ALERTING YOU OF  
T A T  
( O R BAC K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO QUA L I F I E D S E RV I C E  
PERSONNEL.  
I
M
P
O
R
N
"
N
G
E
R
O
U
S
I N S T R U C T I O N S  
A C C O M PA N Y I N G  
T H E P R O D U C T.  
VOLTAGE" INSIDE  
THE PRODUCT.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
 
1
Safety Information  
TECHNICAL SPECIFICATIONS:  
Power supply  
EN  
AC 230V ~50Hz  
Clock backup:9V  
6F22  
Power consumption: 7W  
Please respect the environment. Before  
throwing any batteries away, consult your  
distributor who may be able to take them  
back for specific recycling.  
Do not place the system near wet areas such as  
bathrooms and pool side.  
Do not expose this appliance to rain or moisture  
Avoid storing the system at humid places or near  
abnormally heated areas.  
Power is continuously supplied to the system. To  
disconnect power completely, unplug the power  
cord from the power outlet.  
Do not expose this appliance to dripping and  
splashing.  
 
2
Before you begin  
This clock radio is equipped with a memory  
holding system that can be powered with  
9V battery (not included). The power  
failure protection circuit will not operate  
unless battery is installed.  
Power Failure Indicator  
EN  
When the AC power is interrupted  
(disconnected) for a short period of time,  
both time and alarm settings will change  
(unless optional battery is installed). After  
AC power is restored (reconnected), the  
Digital Display will blink to indicate that  
power was interrupted and you should  
re-adjust the time and alarm settings.  
When normal household power is  
interrupted, or AC cord is unplugged, the  
battery will power the clock radio to keep  
track of time and alarm settings  
programmed into the memory. When the  
battery backup functions, the digital  
display will not light, however, the  
function of alarm still occurs during the  
power interruption if remaining battery  
power is adequate. Normal operation will  
resume after AC power is restored so you  
will not have to reset the time or the  
alarm.  
Install battery as below:  
1. Remove battery compartment door (lo-  
cated at the bottom of the radio) by ap-  
plying thumb pressure to area indicated  
on battery door and then lift the door out  
and off the cabinet.  
2. Connect a 9V battery to the connector  
plug.  
3. Insert battery in the compartment and  
replace the compartment door.  
The descriptions and characteristics in this owner’s manual are for the purpose of general  
reference only and not as a guarantee. In order to provide you with the highest quality  
product, we may make changes or modifications without prior notice. The English version serves  
as the final reference on all product and operational details should any discrepancies arise in  
other languages.  
 
3
Operating the Clock  
EN  
Setting time:  
Tip:  
1. Press the SET button, the “ : “ will flash  
No icon will be flashing if all  
selectors are set, if you see any  
icon flashing on display, press  
the SET button repeatedly to confirm  
everything is set correctly.  
on the display .  
2. Press REV  
or FWD  
to set the time.  
 
4
Operating the Radio  
EN  
FM  
MW  
TUNING  
MW / FM  
Antennas  
Tuning the Stations  
MW antenna - A built-in ferrite rod  
antenna eliminates the need for an out-  
side antenna for MW reception. Rotating  
the unit slightly may improve the recep-  
tion of distant MW stations.  
1. Press ON to turn on the radio.  
2. Slide the MW/FM switch to the desired  
broadcast band.  
3. Turn the TUNING knob to select a  
station.  
4. Press OFF to turn off the radio.  
FM antenna - The power cord acts as your  
FM antenna. It picks up moderate to  
strong stations and eliminates the need for  
an external antenna in most strong signal  
areas. Be sure the power cord is stretched  
to its full length. Do not coil or bunch the  
cord together. Changing position of the  
power cord may improve reception.  
Built-In AFC  
The Built In Automatic Frequency Control  
(AFC) works only on FM. It helps reducing  
drift on FM reception and keeping the  
radio locked in on the FM station to which  
it is tuned.  
When tuning in FM stations, you may  
notice that the station you are tuning can  
be well-tuned on two or three nearby  
points on the dial. Always tune carefully  
at the loudest and clearest point.  
You may try to move the power cord in  
order to improve the reception.  
 
5
Operating the CD player  
EN  
Listening to compact disc  
Selecting play mode  
1. Lift to open the CD compartment door.  
2. Insert a disc and close the door.  
1. Start CD playback.  
2. During playback, press CD MODE to  
toggle between different play mode.  
3. Press PLAY/PAUSE  
4. Adjust volume to your desired level.  
5. Press REV or FWD to skip back-  
ward and forward.  
.
- repeat the current track.  
- repeat the whole disc.  
6. Press STOP to stop CD playback.  
- play tracks randomly.  
- play random track repeatedly.  
When there is no disc in the CD  
compartment, “nd” will show on display.  
 
6
Operating the Alarm  
EN  
Setting the WAKE Time  
Waking by Selected Source  
Your digital clock operates on a 24 hour  
standard mechanism.  
You may be woken up by ALARM  
, RA-  
DIO or CD  
.
1. Press the SET button until ALARM 1 /  
ALARM 2 icon is blinking.  
1. Select an MW or FM station.  
2. Set wake time (see above directions).  
3. Press ALARM 2 or ALARM 1 to select  
2. Press REV  
or FWD  
to set the wake  
time. The time decrements or increments  
will follow by a faster rate when you press  
waking up by ALARM , RADIO  
Corresponding indicator will be up  
next to the selected setting.  
or CD  
.
and hold either REV  
or FWD  
.
3. After the ALARM time is set, press SET  
repeatedly until no icon is blinking.  
4. Adjust the volume by turning VOLUME.  
You can select your CD wake track by the  
following procedures.  
Tip:  
The unit equips with GRAD-U-  
WAKE feature, the alarm tone  
volume will increase gradually  
to its maximum in about 30 to 45  
seconds.  
1. Press WAKE UP CD TRACK.  
2. While pressing, press REV  
to select your desired CD wake up track.  
or FWD  
Note:  
When you turn off the alarm  
by pressing OFF, the alarm  
will turn on at the same time  
tomorrow.  
Tip:  
If you set the SLEEP function  
with low volume level before  
going to bed, we advise using  
ALARM mode to wake you up since its  
volume will automatically increase.  
 
7
Operating the Clock Radio  
Stop the Nap alarm  
Sleep Mode  
EN  
Press NAP or follow “Turning off Alarm”.  
In sleep mode, the radio or CD will turn  
off automatically. Simply:  
1. Press and hold NAP to cancel the nap  
setting.  
2. Only alarm sound can be selected.  
3. Nap alarm is equipped with GRAD-U-  
WAKE feature.  
1. Listen to CD or radio.  
2. While holding SLEEP, press REV  
FWD to set the sleep time. The time  
range is from 1 minute to 2 hours.  
or  
3. Release SLEEP and the current time will  
be shown again. The radio or CD will turn  
off when the preset time elapses. If you  
decide to turn off the radio or CD sooner,  
press SNOOZE or OFF.  
Turning off Alarm  
Silence the alarm momentarily  
Press SNOOZE. The alarm will sound again  
when the snooze period is over.  
4. When SLEEP is activated again, the sleep  
time will be the same as the one you have  
set before.  
5. Press SLEEP to read the remaining sleep  
time.  
Stop the alarm  
Press OFF. The alarm will sound on the  
following day at the same time.  
Disable the alarm permanently  
1. Press CANCEL.  
2. The ALARM indicator will be flashing.  
3. Press ALARM 1 or ALARM 2 within 3  
seconds to deactivate the corresponding  
alarm function permanently.  
Nap Mode  
This function wakes you up after a short  
period of time. Simply:  
1. Press NAP and release. The  
tor will flash. During this period, adjust  
NAP time by pressing REV or FWD  
The range is from 10 minutes to 2 hours.  
2. The clock will be shown after 5 seconds  
indica-  
You can activate the previously set alarm  
time by pressing ALARM 1 or ALARM 2.  
.
if no button is pressed. The  
will lit up.  
indicator  
3. Press NAP once to show time left.  
 
8
Operating the Clock Radio  
Snooze Alarm Operation  
Seconds Time Display  
EN  
This operation allows extra sleep time  
after the alarm is on. The alarm will turn  
off by pressing SNOOZE until the snooze  
period is over. Snooze function can be  
used repeatedly up to 2 hours. After this,  
the alarm will turn off until the next alarm  
conditions are met. Set the “quiet” period  
as follow:  
The unit may display in seconds.  
1. Press REV  
onds display.  
2. Release REV  
or FWD  
or FWD  
to show sec-  
to return  
to the hour and minute display.  
Brightness control  
You can adjust the backlight by adjusting  
the BRIGHTNESS switch at the back of  
the unit, there are two modes you may  
select from:  
1. Press and hold SNOOZE.  
2. Press REV  
or FWD  
to set the  
“quiet” period (the default time is 9 min-  
utes) from 1 minute to 30 minutes. Re-  
lease the button, then the “quiet” period  
is set.  
High — Stronger Backlight.  
Low — Weaker Backlight.  
 
9

Teac Car Stereo System SL D90 User Manual
Tektronix Stereo System WFM90 User Manual
Texas Instruments Computer Drive TMS320F20x F24x DSP User Manual
Toshiba MP3 Player SD V291 User Manual
Troy Bilt Snow Blower 769 03253 User Manual
TVS electronic Printer RP 35 User Manual
Victor Technology Calculator 1228 2 Series User Manual
Vizio Car Satellite TV System M492i B2 User Manual
VTech Cordless Telephone 2121 User Manual
Weber Gas Grill 43267 User Manual