Technicolor Thomson Stereo System CS96 User Manual

                                  
Note:  
                                  
                                    
                                    
                                     
                                     
                                      
                                      
                                        
                                        
English  
Safety Information  
Safety Information  
This symbol means that your  
If the colours of the wires in the mains lead  
of this apparatus may not correspond with  
the coloured markings identifying the  
For UK Only  
CAUTION  
INVISIBLE LASER RADIATION  
inoperative electronic appliance must  
be collected separately and not  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
CONNECT THE MAIN LEAD INTO A  
MAINS POWER SOCKET  
mixed with the household waste. The  
European Union has implemented a  
specific collection and recycling  
terminals in your plug, proceed as follows:  
RAYONNEMENT LASER INVISIBLE  
ATTENTION  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
u s e r  
m a n u a l  
BLUE wire to the terminal coded N  
(Neutral) or coloured black.  
POWER SUPPLY 230V. It must not be  
connected to D.C. mains.  
system for which manufacturers are  
responsible.  
BROWN wire to the terminal coded L (Live)  
ADVARSEL!  
USYNLIG LASERSTRĀLING, NĀR ENHEDEN ER ĀBEN  
OG SIKKERHEDSAFBRYDERNE ER UDE AF  
FUNKTION ELLER OMGĀET. UNDGĀ EKSPONERING  
FOR STRĀLEN.  
or coloured red.  
Note: The mains lead of the set is fitted  
with a moulded plug. If the mains socket  
are not compatible or if for any reason the  
plug is removed please follow the  
directions below. The moulded plug  
cannot be rewired and if removed must be  
disposed of safely.  
This appliance has been designed and  
manufactured with high quality materials and  
components that can be recycled and reused.  
DO NOT make any connection  
to the terminal in the plug  
which is marked  
VORSICHT!  
UNSICHTBARE LASERSTRAHLUNG BEI GEÖFFNETER  
ABDECKUNG, FALLS SICHERHEITS-VERRIEGELUNG NICHT  
EINGERASTET IST ODER WENN SIE BEEINTRÄCHTIG  
IST. SETZEN SIE SICH NICHT DEM LASERSTRAHL AUS!  
Electrical and electronic appliances are liable to  
contain parts that are necessary in order for the  
system to work properly but which can become  
a health and environmental hazard if they are  
not handled or disposed of in the proper way.  
Consequently, please do not throw out your  
inoperative appliance with the household  
waste.  
by the letter E or by the earth  
symbol or coloured green or  
green and yellow.  
DO NOT under any circumstances plug the  
severed plug into any mains socket as this  
could result in electric shock.  
A fused plug must  
be fitted with a 3A  
fuse approved by  
ASTA or BS1362 and  
fuse covers must be  
always be securely  
replaced. If you set  
does not work, the  
fuse may be blown.  
Important: If the plug is removed, rewire  
the new plug as follow:  
CLASS  
LASER KLASSE  
LASERAPPARAT AV KLASS  
AREIL LASER DE CLASSE  
LUOKAN LASERLAITE  
LASERPRODUKT AF KLASSE  
1
LASER PRODUCT  
1
1
If you are the owner of the appliance, you must  
deposit it at the appropriate local collection  
point or leave it with the vendor when buying  
a new appliance.  
• If you are a professional user, please follow  
your supplier’s instructions.  
A
1
1
The wires in the mains plug are coloured  
in accordance to the following code:  
1
BLUE = NEUTRAL/BROWN = LIVE  
VARNING!  
OSYNLIG LASERSTRĀLNING NÄR DENNA  
DEL ÄR ÖPPNAD OCH SPÄRRARNA ÄR  
URKOPPLADE. TITTA EJ IN STRĀLEN.  
I
• If the appliance is rented to you or left in  
your care, please contact your service provider.  
VARO  
AVATTAESSA JA OHITETTAESSA SUOJALUKITUS  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE  
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.  
CAUTION!  
Help us protect the environment in which we  
live!  
Please respect the environment. Before  
throwing any batteries away, consult your  
distributor who may be able to take them  
back for specific recycling.  
Invisible laser radiation when open. Avoid  
exposure to beam. Class 1 laser product. This  
system must be opened only by qualified  
technicians to prevent accidents caused by the  
laser beam.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
THOMSON  
46, quai Alphonse Le Gallo  
92648 Boulogne  
Cedex FRANCE  
T H E L I G H T N I N G CAUTION: TO REDUCE THE  
THE EXCLAMATION  
Have a Blast- Just Not in Your Eardrums!  
Make sure you turn down the volume on  
the unit before you put on headphones.  
Increase the volume to the desired level  
only after headphone are in place.  
LASER  
λ
= 780 nm, P max = 5 mW  
FLASH AND ARROW-  
HEAD WITHIN THE  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
Rating Information: At bottom/rear of the unit.  
This unit comply with the existing  
requirements.  
TRIANGLE IS  
WA R N I N G  
ALERTING YOU OF  
A
WARNING  
SIGN  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
S I G N  
ALERTING YOU OF  
I
I
M
P
T
O
R
R
U
T
T
A
I
N
O
T
S
"
D
A
N
G
E
R
O
U
S
N
S
C
N
VOLTAGE" INSIDE  
THE PRODUCT.  
A C C O M PA N Y I N G  
CS96  
T
H
E
P
R
O
D
U
C
T.  
5629 1560 (EN/F)  
EN/F  
In accordance with the rating plate of  
the unit, this unit complies with current  
standards concerning electrical safety  
and electromagnetlc compatibillity.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
It is important to read this instruction book prior to using your new product for the first time.  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
General Controls  
Before You Begin  
General Controls  
Important Information  
TAPE - Selects tape player.  
Attention should be drawn to the  
Unpacking Your System  
You should have:  
• One main unit (with 2 speakers);  
• One remote control;  
• One user’s guide;  
• One Thomson Warranty Card  
Front View  
Safety Precautions  
Connecting the Speakers  
When connecting the speakers, match the red  
wires to the red jacks and the black wires to the  
black jacks.  
STEREO - Toggles stereo and mono mode in FM  
tuner.  
Front view  
environmental aspects of battery disposal.  
The use of apparatus in moderate climates.  
ON•ECO – Turns on/off the unit. Remember to  
unplug the power cord from the power outlet if you  
are not going to use the system for some time. Press  
and hold to enter ECO mode. In ECO mode, the  
power consumption is below 3W.  
CD – Selects CD mode.  
TAPE – Selects tape mode.  
TUNER/BAND•APP – Selects tuner mode; selects  
radio band in tuner mode; begins auto preset  
programming.  
RDS - In Tuner mode - Shows RDS information in FM  
broadcast (station name (RT), station type (PTY) and  
clock time (CT)).  
CLOCK•TIMER – Shows clock time and timer on/off  
time; enters clock and timer setting mode; enables  
or disables timer mode.  
X-BASS – Enables / disables X-Bass  
REC – Starts/pauses recording from CD / Tuner  
mode.  
Never open the cabinet under any  
circumstances. Any repairs or internal  
adjustments should be made only by a  
trained technician.  
Never operate this product with the  
cabinet removed.  
Do not use your System immediately after  
transporting it from a cold place to a  
warm place, as condensation may cause  
the system to malfunction.  
Keep your unit away from humid areas  
and abnormally hot places.  
Do not touch the player with wet hands.  
If any liquid enters the player cabinet,  
take the player to a trained technician for  
inspection.  
This compact disc player uses a laser to  
read the music on the disc. The laser  
mechanism corresponds to the cartridge  
and stylus of a record player. Although  
this product incorporates a laser pick-up  
lens, it is completely safe when operated  
according to directions.  
Discs rotate at high speed inside the  
player. Do not use damaged, warped, or  
cracked discs.  
RDS - In Tuner FM mode - Selects RDS PTY; radio  
text (INFO ON/OFF); RDS Clock/day (SYNC ON/OFF).  
BAND - Selects radio bands; starts auto preset  
programming.  
Important Battery Information  
Remove the batteries to avoid leakage if you  
do not use your remote control for more than  
one month.  
Speaker Wire Connection  
TUNER - Selects radio tuner.  
REC•II - Starts recording or pauses recording.  
CLK•TIMER - Enters clock and timer setting mode.  
SLEEP - Selects sleep time.  
Installation  
Discard leaky batteries immediately as leaking  
batteries may cause skin burns or other  
personal injuries. Dispose of batteries in the  
proper manner, according to provincial and  
local regulations.  
PRESET / FOLDER + / - - In tuner mode - Selects next  
/ previous preset stations. In mp3 / WMA CD mode -  
Selects the next / previous folder.  
To ensure sufficient ventilation, keep the  
spacing shown as below:  
Push Speaker terminal tab  
down to insert wire.  
Release tab to lock wire in  
the terminal.  
SKIP BACKWARD  
/ SKIP FORWARD  
- In  
Any battery may leak electrolyte under the  
following circumstances:  
Tuner mode - Searches down or up radio frequency.  
In CD mode - Skips to the previous or next track.  
PLAY/PAUSE - In CD mode - Plays disc and  
pauses CD playback.  
NOTE: Make sure the insulation  
is completely removed from the  
speaker wires at all connection points.  
Front view  
10cm  
- if mixed with a different battery type,  
- if inserted incorrectly,  
ends of the  
- if all batteries are not replaced at the same  
time,  
In Tape mode - Plays tape and pauses tape playback.  
STOP - Stops CD and tape playback.  
Using the Antenna  
- if disposed of in fire, or  
- if an attempt is made to charge a battery not  
intended to be recharged  
MUTE - Cuts and restores sound output.  
VOL + / - - Turns up or down volume level.  
PROG•SET - Enters program setting mode; confirms  
your settings; clears preset station in tuner  
programming mode; clears CD program in CD  
programming mode and resets tape counter in tape  
mode.  
SKIP BACKWARD  
CD mode - skips backward or forward to the other  
tracks.  
/ SKIP FORWARD  
In  
Before you use your audio system, you’ll want to  
make sure the FM antenna is positioned properly.  
The FM antenna is the coiled wire connected to the  
back of the unit. Uncoil it, making sure it is fully  
extended (you may even want to tape it to the wall  
behind the unit, if possible. The higher, the better.)  
For better AM reception, move or rotate the unit.  
10cm  
10cm  
In Tape mode - Rewinds or fast forwards tape.  
In tuner mode - Searches down or up radio  
frequency.  
Headset Safety  
Remote Control  
Top view  
Do not touch the pick-up lens which is  
located inside the disc compartment. To  
keep dust from collecting on the pick-up  
lens, do not leave the compartment door  
open for an extended period of time. If  
the lens becomes dirty, clean it with a soft  
brush, or use an air blower brush designed  
for camera lenses.  
Do not play your headset at high volume.  
Hearing experts warn against extended high-  
volume play.  
STOP ( ) – In CD mode - stops CD playback.  
In Tape mode – Stops tape playback.  
PLAY/PAUSE (  
CD playback.  
In Tape mode – Plays and pauses tape playback.  
PROG•SET•CLEAR – Enters program setting mode;  
confirms your settings; clears settings.  
PRESET / FOLDER - / + In tuner mode – Selects  
preset station.  
ON•ECO - Turns the unit on/off  
EQ - Selects among different sound effects (flat  
/ classic / rock / pop / jazz)  
If you experience ringing in your ears, reduce  
volume or discontinue use.  
) In CD mode – Plays and pauses  
Side view  
10cm  
You should use with extreme caution or  
temporarily discontinue use in potentially  
hazardous situations.  
Even if your headset is an open-air designed to  
let you to hear outside sounds, do not turn up  
the volume so high that you are unable to  
hear what is around you.  
REPEAT - In CD mode - toggles repeat options  
(repeat disc / repeat track / repeat off).  
MIX - Selects random playback in CD mode.  
CD - Selects CD player.  
Installing Batteries  
The remote control must be inserted with 2 “AA” or  
“UM-3” or “R6” batteries prior use.  
The apparatus shall not be exposed to  
dripping or splashing and that no objects  
filled with liquids, such as vases, shall be  
placed on the apparatus.  
X-BASS - Enable and disables X-Bass.  
INTRO - Selects Intro play in CD mode.  
DISPLAY - In normal audio CD mode - toggles  
among displaying track elapse time, track  
remain time and disc remain time.  
In mp3 / WMA CD mode - toggles among  
displaying FILE name, FOLDER name, TITLE,  
ARTIST and ALBUM.  
5cm  
In mp3 / WMA CD mode - Selects the previous and  
next folder.  
EQ – Selects among different sound effects (flat /  
classic / rock / pop / jazz).  
VOLUME – Adjusts the sound level.  
PHONES  
Minimum distances around the apparatus  
for sufficient ventilation.  
Top View  
OPEN•CLOSE – Press to open the CD  
compartment door.  
The ventilation should not be impeded by  
covering the ventilation opening with  
items, such as newspaper,table-  
Don’t Infringe  
This product should only be used for the purposes  
for which it is sold, that is, entertainment, violating  
no copyright law. Any attempts to use this product  
for which it is not intended is unlawful and  
therefore not condoned by Thomson.  
– Jack for connecting headphones.  
cloths,curtains,etc.  
No naked flame sources,such as lighted  
candles,should be placed on the apparatus.  
In FM Tuner mode - toggles RDS station  
information (Frequency, RDS name, Radio text,  
RDS type, Clock time, RDS day and PI code)  
Settings  
Settings  
Setting Sleep Time  
You can select the time interval in minutes  
before the unit turns off automatically.  
CD Player  
CD Player  
Display  
10. Repeat steps 2-5 to set timer off hour and  
minute.  
Loading a Disc  
Track Information  
Adjust Sleep Time  
Press SLEEP again when the remaining sleep time  
is displayed to change sleep time.  
CD-R / RW  
This unit is compatible with  
audio CD-R/RW discs.  
Notes on mp3/WMA Disc:  
11. Press PROG•SET•CLEAR to confirm settings.  
1. Press CD to select CD mode.  
For normal audio CDs, press DISPLAY on the  
remote control repeatedly during playback to  
display track remain time, disc remain time and  
track elapsed time.  
WMA  
Use .mp3 as the extension when  
2. Press down on the OPEN/CLOSE area on  
the top of the unit to open the CD  
compartment door.  
FOLDER  
converting audio files into mp3 for  
saving onto CD-R(W) or CD-ROM,  
e.g. Abc08.mp3. Do not use any  
R
P
Timer will be activated automatically after settings  
are finished.  
Press SLEEP on the remote control to toggle  
among OFF, 90, 80, 70, 60, 50, 40, 30, 20, and  
10 minutes.  
3. Insert up a disc with the label facing up.  
4. Close the CD compartment door.  
For mp3 / WMA discs, press DISPLAY on the  
remote control during playback repeatedly to  
display the following song information.  
• FILE name  
Notes on CD-R/RW  
• Do not affix any type of  
labels to either side  
(recordable or labeled side) of  
a CD-R/RW disc as this may  
other extension e.g. .doc, .pdf.  
Do not use the .mp3 extension for other text or  
non-audio data files as this may result in serious  
malfunction and harmful noise interference.  
For better quality in mp3 disc playback, the CD  
quality should be recorded 128kbps or above.  
Disc data size > 650MB is not recommended.  
Total files should not exceed 412 and the total  
folders should not exceed 100. It also depends on  
the length of the file/folder names.  
For mixed mode discs, only one mode will be  
selected for playback depending on the recording  
format.  
Note:  
Sleep is automatically de-  
activated when the unit is turned  
off.  
Activating the Timer  
Press and hold CLOCK•TIMER for 2 seconds on the  
main unit to activate and deactivate the timer  
function.  
If the disc is a mp3 or WMA CD, the mp3 or  
WMA icon lights on the display. mp3 discs  
may take a longer time to read. Wait while  
the unit reads and counts the total number of  
songs on the disc.  
View Remaining Sleep Time  
When sleep is activated, press SLEEP once to  
view remaining sleep time in minutes.  
• FOLDER name  
Setting the Clock  
1. Press CLOCK•TIMER to enter clock setting  
mode. “CLK -- --:00” is displayed.  
• TITLE  
result in the unit malfunctioning.  
Playback capability for CD-RW discs may  
• ARTIST  
• ALBUM  
vary due to variations in the quality of the  
CD-RW disc and the recorder used to  
create the disc.  
The selected song information type shows briefly  
on the display (e.g. FILE), then the detailed  
information scrolls along the display.  
2. Press  
or  
to set the hour.  
If the CD compartment is not loaded with  
a
3. Press PROG•SET•CLEAR to shift to the  
CD or the CD is unreadable, the message “NO  
minute digits.  
4. Press  
5. Press PROG•SET•CLEAR to confirm the  
setting.  
Note:  
DISC” will be shown.  
or  
to set the minute.  
FILE<0123>FILENAME,mp3  
• Timer cannot be set or activated  
if clock time is not set. SET CLK will  
flash on the display when you try to  
activate the timer. Follow  
Sound Features  
Note:  
“0123” indicates the file number of the current  
track on the disc.  
To ensure good performance, wait until the disc  
changer completely reads the disc before  
proceeding.  
Be sure to remove all discs  
from the disc compartment  
before moving or  
Playback  
The display continues to show the selected display  
mode until another selection is activated.  
instructions under “Setting the Clock” to set  
clock.  
Press PLAY/PAUSE  
to begin or pause  
to skip to the  
Preset Equalizer Curves  
Press EQ to toggle among FLAT, CLASSIC,  
ROCK, POP and JAZZ. The selection is  
highlighted.  
Muting Audio  
mp3 files in CD ROM EXTRA format disc cannot  
Setting the Timer  
1. Press CLOCK•TIMER twice to enter timer  
on setting mode. “ON -- --:00” is  
displayed.  
playback.  
transporting the unit!  
be recognized.  
Press STOP  
to stop play.  
Press  
MUTE to silence playback.  
• mp3 file names are limited to 32 characters.  
Folder names are limited to 16 characters.  
• If timer settings have not been entered, SET  
TMR will flash on the display when you try to  
activate the timer. Follow instructions under  
”Setting the Timer” to enter timer settings.  
Press  
or  
previous or next track on the disc.  
Press and hold  
Selecting Folders (mp3 / WMA  
CDs Only)  
or  
to search  
2. Press  
or  
to set the hour.  
through a CD while it is playing.  
3. Press PROG•SET•CLEAR to move to the  
minute digits.  
4. Press  
5. Press PROG•SET•CLEAR to move to source  
selection.  
6. Press  
Press PRESET / FOLDER - to go to the previous  
non-empty folder.  
Press PRESET / FOLDER + to go to the next  
non-empty folder.  
• If timer off time is set as the same as timer  
on time, TIMER NG will flash on the display.  
Set the correct timer off time again.  
or  
to set the minute digits.  
X-Bass  
Press X-BASS to turn on/off the x-bass feature.  
or  
to select source (Tuner  
• Rec TU mode enables you to program the  
recording of desired radio programs. Ensure  
recording tape is inserted into the deck for  
doing so.  
The  
icon is displayed.  
/ CD / Tape / Rec TU)  
If Rec TU is selected, “TU PR 1” will be  
displayed. Press or to select a  
preset station to record.  
7. Press PROG•SET•CLEAR to move to  
volume setting.  
8. Press  
or  
to select desired  
volume level.  
9. Press PROG•SET•CLEAR to move to timer  
off time setting. “OFF -- --:00” is displayed.  
CD Player  
Radio  
Radio  
CD Player  
DOCUMENT (documentary),  
TEST (test)  
4. Press PROG•SET•CLEAR to confirm your  
selection and store that track into memory. The  
next available memory locations shows on  
the display. Repeat step 3 and this step to store  
additional tracks. In CD program mode, the  
PROG. icon lights on the display.  
mp3/WMA Playback Sequence  
Selecting Tuner Band  
Auto Preset Programming  
Random Playback  
RDS  
ALARM (alarm)  
Refer to the diagram below for playback sequence details on multi-level folder structure.  
Songs are played before playing songs placed in folders at each level.  
Press TUNER/BAND•APP on the main unit  
or TUNER on the remote control to select  
radio mode.  
Select a radio band by pressing TUNER/  
BAND•APP on the main unit or BAND on  
the remote control:  
FM – Frequency Modulation (87.5 – 108  
MHz)  
MW – Medium Wave (522 – 1611 KHz)  
LW – Long Wave (150 – 283 KHz)  
Press and hold TUNER/BAND•APP on the main  
unit or BAND on the remote control to scan  
stations. A maximum of 30 stations can be stored.  
Beware of your preset channels being erased  
accidentally because the scanning and storing  
process is automatic upon pressing the button.  
Press  
to turn on/off the playing of tracks in  
If RDS station is found, RDS lights on the  
display with station name shown.  
random order. (Remote Only)  
PTY Search  
1. Press RDS repeatedly to select “FIND”.  
2. Press PRESET - or + to toggle the desired  
RDS station type.  
Sampling Tracks  
Displaying RDS station  
Information  
Press DISPLAY on the remote control  
repeatedly to display station information:  
LEVEL 1  
LEVEL 2  
LEVEL 3  
LEVEL 4  
Playing a Program List  
Intro Play lets you enjoy the CD tracks for 10  
seconds. When the last track has played for  
10 seconds, the Intro Play stops. Press INTRO  
on the remote control to enable or disable  
the function.  
3. Press  
or  
to begin searching for  
Press any button to stop scanning.  
A
B
RDS stations in the selected category.  
While in PROGRAM mode, press PLAY/PAUSE  
When the unit is playing the program, “PROG”  
icon will be displayed.  
.
3
4
5
Folder 1.1  
Song 1.1.1  
Song 1.1.2  
Song 1.1.3  
Folder 1  
Listening to the Preset Station  
1. Press TUNER/BAND•APP.  
2. Press PRESET + / - repeatedly to locate your  
desired memory location.  
4. Radio text (RT)  
1. Frequency  
2. RDS name  
3. Program type (PTY)  
Searching for a Station  
5. Clock time (CT) - “SYNC OFF”.  
Press RDS repeatedly to select “SYNC OFF”.  
Press  
“SYNC ON”.  
C
F
D
View and Edit Program List  
1. Press PROG•SET•CLEAR repeatedly to view  
program list.  
To edit program location, press  
PROG•SET•CLEAR until the location you want  
to edit is displayed.  
RDS NEWS (news),  
6
7
8
Song 1.2.1.1  
Song 1.2.1.2  
Song 1.2.1.3  
Press  
station.  
or  
to search for a radio  
Folder 1.2.1  
Repeat  
Folder 1.2  
Folder 2.1  
or  
to toggle “SYNC OFF” and  
AFFAIRS (current affairs),  
INFO (weather, medical),  
SPORT (sports),  
To search automatically, press and hold  
Press DISPLAY repeatedly on the remote  
control to select among REPEAT 1 (repeat  
current track), REPEAT (repeat all tracks) and  
repeat off mode.  
Suppressing Stereo Signal  
Press STEREO on the remote control to toggle  
between FM mono and stereo for FM broadcast.  
or  
for 1 second.  
6. RDS DAY  
E
EDUCATE (education),  
DRAMA (series and plays),  
CULTURE (religion),  
12  
Song 2.1.1  
Song 2.1.2  
Folder 2  
Presetting a Station  
A maximum of 30 stations can be stored.  
13  
2. Press  
stored.  
or  
to select the new track to be  
SCIENCE(science and technology),  
VARIED (miscellaneous),  
POP M (pop music),  
If FM stereo reception is weak, select mono sound  
to reduce noise.  
3. Press PROG•SET•CLEAR to confirm.  
Setting Up a CD Program  
1. Press TUNER/BAND•APP on the main unit  
or BAND on the remote control to select  
band.  
ROCK M (rock music),  
9
10  
Song 2.2  
Song 2.3  
MOR M (middle-of-the road music),  
LIGHT M (light music),  
CLASSICS (classical music),  
OTHER M (unclassified music),  
WEATHER (weather),  
Deleting Program List  
Press and hold STOP for 2 seconds to clear  
program list. The program list will also be cleared  
once the CD compartment door is opened. The  
system displays the message “CLEAR” briefly.  
11 Song 2.4  
2. Press  
stored.  
or  
to select station to be  
G
A maximum of 20 tracks can  
be programmed.  
3. Press PROG•SET•CLEAR to enter program  
mode.  
4. Press PRESET - or + to select memory  
location (up to 30 memory locations).  
When you are selecting the preset  
location, the preset station number is  
flashing.  
14 Song 3.1  
15  
Folder 3  
FINANCE (financial information),  
CHILDREN (children’s program),  
SOCIAL (social news),  
RELIGION (religious program),  
PHONE IN (phone-in program),  
TRAVEL (travel & leisure),  
HOBBY (hobby),  
JAZZ (Jazz music),  
COUNTRY (country music),  
NATIONAL (national),  
OLDIES (oldies),  
FOLK M (folk music),  
Song 3.2  
1. Select CD mode by pressing CD.  
2. In stop mode, press PROG•SET•CLEAR  
after the CD has been loaded into the  
system. The message “0 Pr01” will be  
shown on the display.  
1
2
Song 4  
Song 5  
5. Press PROG•SET•CLEAR to confirm the  
setting.  
3. Press  
or  
to select a track to be  
stored into memory location 1.  
Note:  
• Folder playback sequence is indicated by the letters from A to G  
• Song playback sequence is indicated by the number 1 to 15 in front of the song name.  
Tape Player  
Playing Cassette Tape  
Maintenance  
Disconnect the audio system from the power  
source before performing any maintenance.  
Troubleshooting Tips  
Recording a CD  
Cleaning CDs  
• Dirty CDs can cause poor sound quality. Always  
keep CDs clean by wiping them gently with a soft  
cloth from the inner edge toward the outer  
perimeter.  
Solution  
Problem  
Solution  
Problem  
1. Press TAPE to select tape mode.  
2. Press on the OPEN/CLOSE area to open  
the deck door.  
3. Load a cassette tape into the deck. Then,  
lightly press the deck door closed.  
1. Press CD to select CD mode.  
• Check power cord for a  
secure connection.  
• Unplug the unit for a  
moment, and then plug into  
power source again.  
• Check the outlet by  
plugging in another device.  
• Clean the disc.  
System will not  
turn on  
CD sound skips  
2. Press  
or  
to select the track that you  
• Check disc for warping,  
scratches, or other damage.  
• Check if something is causing  
the system to vibrate. If so,  
move the system.  
want to record.  
CD Player  
CAUTION! This system operates with a laser. It  
must be opened by only a qualified technician.  
3. Press REC to record. The REC. icon will flash on  
the display. Press REC again to start recording.  
CD automatically starts playback at the same  
time.  
Press PLAY/PAUSE  
Press or  
the desired position.  
Press STOP to stop.  
to start tape play.  
CD Lens Care  
to position the tape at  
• Make sure the speakers are at  
least 3 feet away or on a  
different surface from the main  
unit.  
4. Press STOP  
to stop recording.  
When your CD lens gets dirty it can also cause the  
system to output poor sound quality. To clean the  
lens you will need to purchase a CD lens cleaner  
which can maintain the output sound quality of  
your system. For instructions on cleaning the CD  
lens, refer to the ones accompanying the lens  
cleaner.  
Tape Player  
• Increase the volume  
setting.  
• Check connection to  
speakers.  
• Check that you have  
selected the appropriate  
function: CD, TAPE, Tuner.  
• Make sure mute is off.  
• Make sure headphones are  
not plugged in.  
No sound  
To prevent deterioration of sound quality,  
periodically open the door of each deck and  
clean the magnetic heads, pinch roller, and  
capstan with a cotton bud dipped in alcohol.  
Also, demagnetize the head by playing a  
demagnetizing cassette (available through an  
audio equipment store).  
Reset Tape Counter  
Press PROG•SET•CLEAR to reset counter.  
Recording a Radio Program  
• Switch to another function  
(TAPE, Tuner) and then back to  
CD.  
CD button will not  
respond  
1. Press TUNER/BAND•APP on the main unit  
or BAND on the remote control to select  
tuner mode and desired band.  
• Inspect the tape head, clean  
it if neccessary.  
Distorted or noisy  
tape recordings  
2. Tune to the station you want to record by  
Technical Specification  
Power supply: 230V~50Hz  
Dimensions ( H x W x D mm):  
Unit size - 236.5 x 146 x 230  
Speaker - 236.5 x 146 x 195  
Net Weight - 7.5kg  
pressing  
or  
.
To protect recordings on one or both sides of a  
tape, remove the corresponding tab. If you  
later want to record on the tape, affix a piece  
of adhesive tape over the hole.  
3. Press REC on the main unit. The REC. icon  
will flash on the display. Press REC again  
to start recording.  
• Check that the batteries are  
properly installed.  
• Replace weak batteries.  
• Check the system is plugged  
into power source.  
• Point the remote directly at  
the system’s front panel.  
• Move closer to the system.  
• Remove any obstacles  
between the remote and the  
system.  
Remote control  
does not work  
• Check antenna connection.  
• Move antenna.  
• Turn off nearby electrical  
appliances, such as hair  
dryer, vacuum cleaner,  
microwave, fluorescent  
lights.  
Poor radio  
reception  
4. Press STOP  
to stop recording. Press REC  
again to pause recording. To resume  
recording, press again.  
Tape deck: Response curve: 125Hz-8kHz (-5dB)  
CD player: Response curve (+/- 2dB): 60Hz to  
20 kHz  
Rating Plate: Look for it at the back of the set.  
Quit Slacking - A little bit of slack in your tapes  
can cause scratches on the tape, or worse yet,  
the tape could break. If you notice some slack  
in the tape, use a pencil to tighten it up before  
you insert it.  
• Check that CD is in the  
tray.  
• Check that CD label is  
facing up.  
CD does not play  
• Check that PAUSE mode is  
not on.  
A
• Check that CD function is  
selected.  
• Use CD lens cleaner.  
• Clean the disc.  
• Try another disc  
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as  
a guarantee. In order to provide you with the highest quality product, we may make changes or modifications  
without prior notice. The English version serves as the final reference on all product and operational details should  
any discrepancies arise in other languages.  
CS96_EN  
1
1/9/06, 12:41 PM  
 

Taylor Scale 7544BL User Manual
Telex Network Card BTR 200 Series User Manual
Topcom Watch HB 6M00 User Manual
Toshiba Copier e studio 550 650 810 User Manual
TP Link Landscape Lighting CPE210 User Manual
Transition Networks Cooktop RS 232 TO 100BASE FX User Manual
Uniden Two Way Radio PRO520XL User Manual
Verilux Indoor Furnishings VF05 MAN REV3 User Manual
ViewSonic Projector PJD6210 3D DLP User Manual
ViewSonic Projector PRO8400 User Manual