Technicolor Thomson Stereo System DPL911VD User Manual

THOMSON  
46, quai Alphonse Le Gallo  
92648 Boulogne  
Cedex FRANCE  
55930860  
 
Safety Information  
Thomson Information  
ADVARSEL!  
USYNLIG LASERSTRÅLNING VED ÅBNING NAR  
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.  
UNGDÅ UDSAETTELSE FOR STRÅLNING.  
CAUTION!  
VORSICHT!  
UNSICHTBARE LASERSTRALUNG  
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–  
VERRIEGELUNG ÜBERBRÜCKT.  
NICHT DEM LASERSTRAHL AUSSETZEN!  
Invisible laser radiation when open. Avoid exposure to beam.  
Class 1 laser product. This system must be opened only by  
qualified technicians to prevent accidents caused by the laser  
beam.  
LASER λ = 780nm, P max=5 mW  
CAUTION – INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
Rating Information : At the bottom of the unit.  
This unit complies with the existing requirements.  
In accordance with the rating plate of the unit, this unit com-  
plies with current standards concerning electrical safety and  
electromagnetic compatibility.  
ATTENTION  
RAYONNEMENT LASER INVISIBLE  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
In accordance with the rating plate of  
the unit, this unit complies with current  
standards concerning electrical safety  
and electromagnetic compatibility.  
Please respect the environment!  
Before throwing any batteries away, con-  
sult your distributor who may be able to  
take them back for specific recycling.  
VARNING–  
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.  
BETRAKTA EJ STRÅLEN.  
VARO!  
AVAT TAESSA JA SOUJALUKITUSOHITETTAESSA  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.  
LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.  
Have a Blast-Just Not in your eardrums  
Make sure you turn down the volume on  
the unit before you put on headphones.  
Increase the volume to the desired level  
only after headphones are in place.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
AREIL  
APP  
A
LASER DE CLASSE 1  
LUOKAN 1 LASERLAITE  
KLASS 1 LASERAPPARAT  
FOR UNITED KINGDOM VERSION ONLY  
Do NOT make any connection to the  
terminal in the plug which is marked  
by the letter E or by the earth symbol  
or coloured green or green and yellow.  
CONNECT THE MAIN LEAD INTO A MAINS POWER  
SOCKET  
POWER SUPPLY 230V ~ 50 Hz. It must not be connected to  
D.C. mains.  
A fused plug must be fitted with  
Note: The mains lead of the sets is fitted with a moulded plug.  
If the mains sockets are not compatible or if for any reason  
the plug is removed please follow the directions below. The  
moulded plug cannot be rewired and if removed must be dis-  
posed of safely.  
a 3A fuse approved by ASTA or  
BSI to BS1362 and fuse covers  
must be always be securely re-  
placed. If your set does not  
work, the fuse may be blown.  
Do NOT under any circumstances plug the severed plug into  
any mains socket as this could result in electric shock.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Important: If the plug is removed rewire the new plug as  
follows:  
The wires in the mains plug are coloured in accordance with  
the following code:  
T H E L I G H T N I N G  
FLASH AND ARROW-  
HEAD WITHIN THE  
CAUTION: TO REDUCE THE  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
THE EXCLAMATION  
A
TRIANGLE IS  
A
WARNING  
SIGN  
ALERTING YOU OF  
T A T  
BLUE = NEUTRAL / BROWN = LIVE  
WA R N I N G S I G N  
ALERTING YOU OF  
" D A N G E R O U S  
VOLTAGE" INSIDE  
THE PRODUCT.  
I
M
P
O
R
N
As the colours of the wires in the mains lead of this apparatus  
may not correspond with the coloured markings identifying  
the terminals in your plug, proceed as follows:  
BLUE wire to the terminal coded N (Neutral) or coloured black.  
BROWN wire to the terminal coded L (Live) or coloured red.  
I N S T R U C T I O N S  
A C C O M PA N Y I N G  
T H E P R O D U C T.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
 
Table of Content  
Table of Contents  
Other Function  
Tuning to radio stations ............................... 18  
Presetting radio stations............................... 18  
Listening to preset radio stations ................ 18  
Listening to an external source .................... 18  
Sleep timer setting ........................................ 18  
General Information  
Features ........................................................... 2  
DVD region codes ........................................... 2  
Disc can be played........................................... 2  
Glossary of disc term ....................................... 2  
Conventions about this manual ..................... 2  
Notes on disc ................................................... 3  
Accessory ......................................................... 3  
Inserting batteries into the remote control .. 3  
Troubleshooting........................................ 19  
Specifications ............................................ 20  
Cares and Maintenance............................ 21  
Function Overview  
Front panel ...................................................... 4  
Back panel ....................................................... 4  
Display ............................................................. 5  
Remote control ............................................... 6  
Connections  
Connecting to speakers .................................. 7  
Connecting to AM / FM antenna ................... 7  
Connecting to TV and additional components  
......................................................................... 8  
Basic Setup  
Setting up the Digital Home Theater system  
......................................................................... 9  
General setup ................................................ 10  
Audio setup ................................................... 11  
Setting the language .................................... 12  
Setting the parental...................................... 12  
Setting the password .................................... 12  
Set as defaults ............................................... 12  
Playing Discs  
General operation......................................... 13  
Basic playback ............................................... 13  
Using the menu for DVD .............................. 13  
Playing mp3 music files and displaying JPEG  
files................................................................. 15  
Using the menu for VCD.............................. 16  
Using the menu for CD ................................. 17  
Playing video CDs with PBC .......................... 17  
1
 
General Information  
Features  
Glossary of disc terms  
DVD player built-in Dolby Digital*2 / DTS*1 decoder.  
Digital amplifier.  
Title (DVD)  
The longest sections of a picture or a music piece on a  
DVD; a movie, etc., for a picture piece on a video soft-  
ware; or an album, etc., for a music piece on and audio  
software. Each title is assigned a title number enabling  
you to locate the title you want.  
Tuner (AM/FM) receiver.  
Conforming DVD, SVCD, VCD1.1, VCD2.0, MP3, CDR,  
CDRW and CD-DA discs.  
DVD navigation and SVCD, VCD 2.0 PBC controlling  
functions.  
VFD front panel display and OSD menu display.  
Full function remote control.  
Chapter (DVD)  
Sections of a picture or a music piece that are smaller  
than titles. A title is composed of several chapters. Each  
chapter is assigned a chapter number enabling you to  
locate the chapter you want. Depending on the disc, no  
chapters may be recorded.  
*1  
Manufactured under license from Digital Theater  
Systems, Inc. US Pat. No. 5,451,942, 5,956,674,  
5,974,380, 5,978,762 and other world-wide patents  
issued and pending. "DTS" and "DTS Digital Sur-  
round" are registered trademarks of Digital  
Theater Systems, Inc. Copyright 1996, 2000 Digital  
Theater Systems, Inc. All Rights Reserved.  
Track (Video or audio CD)  
Sections of a picture or a music piece on a VIDEO or a CD.  
Each track is assigned a track number enabling you to  
locate the track you want.  
*2  
Manufactured under license from Dolby Laborato-  
ries. “Dolby” and the double-D symbol are trade-  
marks of Dolby Laboratories. Confidential Unpub-  
lished Works.  
Conventions about this manual  
Instructions in this manual describe the controls on the  
system. You can also use the controls on the remote  
control if they have the same or similar names as those  
on the system.  
DVD region code  
DVD players and discs are designed with region numbers  
which dictate the region (printed on the rear panel). If the  
region number of the DVD does not match with the region  
number of the DVD player, you will not be able to play the  
disc. If you try to play the DVD, the message “WRONG  
REGION” will appear on OSD.  
The types of functions and operations that can be used  
for a particular disc vary depending on the features of  
that disc. In some cases, these functions and operations  
may differ from the descriptions given in this Operations  
Manual. In that case, follow the instructions given on the  
screen. This Operations Manual only covers basic disc  
operations.  
For some operations, a icon may appear on the the  
screen. This indicates that the operation described in this  
Operations Manual is not permitted for the current disc.  
The drawings about the TV screen and front panel  
display used in this Operations Manual are purely for the  
purposes of explanation. The actual displays may differ  
slightly from what are shown here.  
The region number for this DVD player is 2.  
About CDR, CDRW, Audio mp3, Com-  
pact Disk Audio (CDA), DVD Video  
This model is compatible to play CDR, CDRW, DVD+/- R, DVD  
+/- RW, mp3 audio, Compact Disk Audio (CDDA), Video  
Compact Disk (VCD), Dolby digital track, JPEG pictures.  
While your disc player is compatible with the largest number  
of discs possible, it cannot be guaranteed that you will be  
able to play discs which might not be compatible with audio  
CD, VCD and SVCD standards.  
ATTENTION  
This unit is incompatible with the following disc formats:  
DVD-ROM, DVD RAM, CDV, SACD, DVD Audio (High resolu-  
tion tracks). Data part of CD Extra, disc with non standard  
shape (e.g. heart), disc with region code different from the  
one specified on the back of the unit.  
2
 
General Information  
Notes on disc  
Accessary  
Check that you have the following items:  
Disc handling precautions  
EN  
Main unit (1)  
Subwoofer (1)  
Speakers (5)  
Remote control (1)  
AAA batteries (2)  
Video cable (1)  
Speaker cords (6)  
AM loop antenna (1)  
FM pigtail antenna (1)  
Operations Manual (1)  
To keep the disc clean, handle the disc by its edge. Do  
not touch the surface.  
Do not stick paper or tape on the disc.  
If there is glue (or a similar substance) on the disc,  
remove the glue completely before using the disc.  
n
o
Inserting Batteries into the Remote  
Control  
You can control the system using the supplied remote.  
Insert two batteries by matching the + and - on the  
batteries. When using the remote, point it at the remote  
sensor on the front panel of this system.  
Do not expose the disc to direct sunlight or sources  
such as hot air ducts, or leave it in a car parked in  
direct sunlight as there can be considerable rise in  
temperature inside the car.  
After playing, store the disc in its case.  
Do not write on the label side with a ball-point pen or  
other writing utensils.  
Note  
Do not leave the remote in an extremely hot or humid  
place.  
Do not use a new battery with an old one.  
Do not drop any foreign object into the remote casing.  
particularly when replacing the batteries.  
Do not expose the remote sensor to direct sunlight or  
lighting apparatuses. Doing so may cause a malfunc-  
tion.  
If you will not use the remote for an extended period  
of time, remove the batteries to avoid possible dam-  
age from battery leakage and corrosion.  
Be careful not to drop or bend the disc.  
Disc cleaning precautions  
Before playing, clean the disc with a cleaning cloth.  
Wipe the disc from the center out.  
Do not use solvents such as benzine, thinner,  
commerically avaiable cleaners or anti-static spray  
intended for viny1 LPs.  
Disc installing precautions  
Do not install more than 1 disc on disc tray.  
Do not place the disc on the tray up-side down.  
Do not try to close the disc tray when the disc is not  
installed properly.  
3
 
Function Overview  
Display  
EN  
1. Speaker Icons  
11. Track Indicator  
Indicates which of the six speakers is operating.  
Shows the track number on CD.  
2. Status Bar  
12. Preset indicator  
Shows the operating information.  
Shows the preset station.  
3. Frequency Unit Indicator  
13. Chapter indicator  
In AM mode, “KHz” lights up. In FM mode, “MHz” lights  
up.  
Shows the chapter number.  
14. Program indicator  
Shows when programming is in progress.  
4. VCD indicator  
Shows when VCD is playing.  
15. Sleep indicator  
Shows when the sleep timer is activated.  
5. Dolby Pro Logic  
Shows when the playing disc is recorded in Dolby Pro Logic  
format.  
16. Repeat indicator  
Shows when the repeat function is activated.  
6. Dolby Digital indicator  
Shows when the playing disc is recorded in Dolby Digital  
format.  
17. A-B indicator  
Shows when the repeat AB function is activated.  
7. DVD indicator  
18. DTS indicator  
Shows when a DVD is playing.  
Shows when the playing disc is recorded in DTS format.  
8. PAUSE indicator  
19. STEREO indicator  
Shows when playback is paused.  
Shows when the playing disc is recorded in STEREO format.  
9. PLAY indicator  
20. CD indicator  
Arrow icon is lit during playback.  
Shows when playing CD.  
10. Title indicator  
21. mp3 indicator  
Shows the title number.  
Shows when playing mp3 disc.  
5
 
Function Overview  
7. Adjustment Buttons  
Remote Control  
• When the display shows the general setup page, press the arrow buttons  
to select the option you want to change, and press the up and down  
buttons to make changes, then press OK to finalize your choice.  
Please be sure you have inserted the batteries into the  
remote control (see relevant section on page 3.) You can test  
it by pressing any button.  
8. Number Buttons  
• In Tuner mode, press to select a preset station.  
• In DVD/CD mode, enable pull down menu by INFO•RDS (Button 15), then  
press the OK key to select field to be adjusted. Press the Number Buttons to  
direct input the settings (e.g. CD track)  
22  
1
9. MENU  
2
• In Tuner mode:  
- Press TUNER to select band.  
- Press to store desired frequency in memory. The flashing word PROG will  
appear on display. Input your desired channel number while the word is still  
flashing and the frequency will be stored.  
• In DVD mode, press for menu setup for DVD title.  
3
4
5
10. Operation Buttons  
PR  
11  
• Press TUNER on the remote to enter tuner mode. In TUNER mode, you  
can press TUNER to select band, and press TUNER + or TUNER - buttons to  
tune down or up the radio frequency.  
• In CD/DVD mode  
- press the PLAY button to start playback.  
- press the STOP button to stop playback.  
- press the PAUSE button to pause playback.  
- press the REVERSE/FORWARD buttons to search backward/forward  
throughthe disc.  
21  
9
7
In DVD mode  
Press the PAUSE button to pause playback and then press the REV or FWD  
buttons to make a backward and forward slow motion playback. A number  
of speeds can be selected by toggling REVERSE or FORWARD buttons.  
Reverse slow motion will be available at the same step as Forward play for  
DVD only. Only 3 different speeds are available in VCD/SVCD forward play.  
17  
19  
15  
20  
16  
11. RETURN  
• Press to go back to previous menu or exit setup menu completely.  
8
12. AUDIO  
• Press to select the audio channel you like. (e.g. Stereo / Mono Left /  
Mono Right)  
In SVCD mode, press to toggle 4 different audio channels (if  
available).  
13  
6
• In Tuner mode, press this button to switch from ST to MONO mode and  
vice-versa.  
• In DVD mode, press to select different audio channel (if available).  
AV  
12  
13. ANGLE (DVD only)  
• Press to select different screen display angles.  
10  
14  
18  
14. ZOOM (VCD/SVCD/DVD/JPEG file)  
• During VCD/SVCD/DVD/JPEG files playback, press ZOOM and then press  
UP/DOWN/LEFT/RIGHT to pan the image.  
15. INFO-RDS  
2
• In DVD/CD mode, press to display playback information.  
• In TUNER mode, press to display RDS information.  
16.TITLE-GUIDE  
• Press to go to the title menu at DVD mode.  
17. DSP  
• Press to change the surround sound settings. The display will toggle  
among Dolby Digital, DTS and Stereo.  
18. PLAYMODE  
• Press to enter repeat mode selection.  
1. ON-OFF  
• To turn on or turn off the receiver and other auxiliary components.  
19. EQUALIZER  
• Press to toggle between BASS, TREBLE and speaker’s level setting, then  
press LEFT/RIGHT to change the setting.  
2. Source Buttons  
• To turn on and select various audio / video sources.  
20. BASS  
3. PR+, PR- (Channel Buttons)  
• To adjust BASS / TREBLE, press this button once to choose either bass or  
treble, then press LEFT/RIGHT to adjust level. (Bass / treble adjustment is  
not allowed for DTS source)  
• To select programmed stations in TUNER mode.  
• To skip to the next / previous chapter, track or image in DVD, CD , mp3  
and JPEG mode.  
21. CLEAR / SLEEP  
• Press once to enter or quit SLEEP mode.  
4. VOL+, VOL- (Volume Buttons)  
• To adjust the volume level.  
22. TV  
• Press to enable the remote to control a RCA TV.  
• Press DVD, TUNER, AUX1 or AUX2 buttons to return to the appropriate  
mode.  
5. MUTE  
• To mute / un-mute all audio outputs.  
6. AV  
• Press to select VCR or TV input.  
6
 
Connections  
LEFT  
+
-
+
-
EN  
CENTER  
-
+
Purple  
Black  
+
-
FR  
FL  
SL  
SW  
SR  
C
6 ohm  
8 ohm  
6 ohms  
-
+
REAR  
REAR  
-
+
-
+
Connecting to AM / FM antenna  
Connecting to Speakers  
Connect the supplied AM loop antenna to the AM jack.  
Position the loop antenna to receive the clearest sound.  
Connect the supplied FM antenna to the FM jack. Move  
the antenna in various direction until the clearest signal  
is received.  
Connect the supplied speakers ,using the supplied speaker  
wires to match the colors of the jacks and speaker wires.  
Connect the supplied speaker wire its corresponding  
terminal jacks.  
To avoid short-circuiting the speakers  
Note  
Short-circuiting of the speakers may damage the system.  
To prevent this, make sure to take the following precau-  
tions when connecting the speakers.  
Keep the antenna as far away as possible from the TV,  
VCR or any radiation source to prevent unwanted noise.  
Make sure the stripped end of each speaker cord does  
not touch another speaker terminal or the stripped end  
of another speaker cord.  
If you have poor FM reception  
For better FM reception, use a 75 ohm coaxial cable (not  
supplied) to connect the system to an outdoor FM antenna  
as shown.  
Note  
Be sure to match the speaker cord correctly.  
For optimal sound performance, use the supplied speakers.  
Do not connect speakers with an impendance lower than  
the speakers supplied.  
Examples of poor conditions of the speaker cord  
Stripped speaker cord is touching another speaker  
terminal.  
AM  
Stripped cords are touching each other due to excessive  
removal of insulation.  
FM 75  
7
 
Connections  
Connecting to TV and additional components  
• Connect the S-VIDEO OUT jack to the S-Video input  
Use the supplied audio cables to connect AUDIO IN  
jacks to the corresponding audio output jacks on the  
TV, VCR or other audio/visual components.  
jack on the TV using a S-Video cable (not included).  
• Connect the VIDEO OUT jack to the Video input jacks  
on the TV using a video cable.  
Use the audio cables to connect AUDIO OUT jacks to  
the corresponding audio in jacks on the TV, CD or  
TAPE recorder.  
• Connect the AUX2 jacks to any audio/video device  
using Audio/Video cables  
• Connect the SCART OUT jack to the TV with corre-  
sponding input (if available).  
VCR  
TO VIDEO IN (VCR)  
TV  
(If available)  
VIDEO IN (TV)  
L
2
1
S-VIDEO  
S-video provides a better connection for the video portion of the signal  
than composite video (yellow color terminal). When connecting S-video  
cable, a Composite video cable (yellow RCA connector) must also be  
used. S-video provides video output for DVD playback only.  
SAT  
SCART video output  
SCART video terminal provides the best quality for video signal. If there is no SCART socket is available on your TV set,  
check whether your TV has another Video socket (Composite, S-video) that you can use to connect your player.  
Setup video output  
You can select either S-video or SCART as your video output, then you must turn off and on the unit to validate selection.  
When S-video output is selected, only S-video and composite output will function properly.  
When SCART output is selected, only composite output will function properly.  
8
 
Basic Setup  
Setting up the Digital Home Theater system  
General setup  
EN  
You must connect all the speakers and setup the system  
properly in order to enjoy the Cinema experience at home.  
You will have the feeling of being in the middle of the  
action, because sound is coming from everywhere around  
you. The subwoofer can enhance the bass performance of  
your system dramatically.  
1 Press the EQUALIZER button to select a channel. The  
level of the channel will appear on the front panel  
display. (FL, FR, C, SL, SR, SUB, TRE, BASS change cyclically)  
TRE (Treble level) and BAS (Bass level) adjustable range: -  
10 dB to +10 dB, at 2 dB/step.  
2 Use the TUNER+ and TUNER- buttons to adjust the  
selected channel’s level.  
The value will be stored in the system automatically  
when you release the TUNER+ or TUNER- buttons for a  
few seconds.  
1. Setting the TV display  
You can select the aspect ratio of the TV display.  
3
Press the DSP key, the surround mode will show on VFD.  
4x3 Standard  
Note:  
If you have a conventional TV set  
and your DVD is not formatted for  
widescreen viewing, use this  
setting. A wide picture is displayed  
on the whole TV screen with a  
portion automatically cut off.  
The optional items vary with the change of listening mode.  
To adjust the volume of all the speakers (Master  
Volume) at one time  
Use the VOL+ and VOL- buttons in normal mode.  
4x3 Letterbox  
Enter Setup Menu  
If you have a conventional TV set  
and your DVD is formatted for  
widescreen viewing, use this  
setting. Wide bands will be  
displayed on the upper and lower  
portions of the TV screen.  
1 Press STOP to enter SETUP MENU when a DVD/VCD/CD  
disc is playing. Press INFO twice after press STOP when a  
mp3 disc is playing. (If there is no disc in the disc tray,  
system will enter SETUP MENU automatically)  
2 Use  
/
/
/
to select your preferred option.  
3 Press OK to confirm a highlighted selection.  
4 To exit setup menu, return to the main menu and select  
Play.  
16x9 Widescreen  
If you have a widescreen TV  
set, use this setting (you  
must also set your  
widescreen TV to “full size”)  
2. Selecting the language for OSD  
This function allows you to select the desired language.  
The default setting is English.  
Option: English, French, German, Italian, Spanish.  
9
 
Basic Setup  
2 Test tone  
Audio Setup  
• This function is available to DVD mode only.  
• When setting TEST TONE on, the unit will give signals  
to each speaker respectively, so you can decide if any  
fine-tuning is needed for that speaker.  
• The test tone function can be activated even when  
there is no disc in the tray.  
Dynamic range setting  
In many listening situations, it is not recommended to set  
the volume too high, and thus the loudest sound must  
be compressed downwards in level. Likewise, the very  
quiet sounds would be inaudible and must be brought  
upwards in level to be heard. Dolby Digital satisfies these  
needs through the dynamic range controlling.  
Selects the dynamic range compression to fit the indi-  
vidual listening situation of the audience. The variable  
range is Softer, Soft and OFF.  
Softer: Audio with highly compressed dynamic range.  
Soft: Audio with partially compressed dynamic range.  
OFF: Audio without compressed dynamic range.  
Downmix  
This function can process a multi-channel audio source to  
a two channel stereo signal. The options are Stereo and  
Off.  
Note:  
Dynamic range is only applicable on Dolby Digital  
soundtrack.  
Speaker setup  
1 Distance setup  
In order to make the surround sound more effective and  
suit the acoustic conditions in your listening room, you may  
need to delay the signal coming from some of the speaker  
by setting the distance between the speakers and the lis-  
tening position.  
• This function is to set the distance of the front  
speaker, center speaker and rear speaker.  
• The distance range is from 1.5m to 9.2m.  
10  
 
Basic Setup  
Play mode setup  
Preferences setup  
EN  
Setting the TV type  
Setting the Program  
You can setup the colour system of this unit to match up  
your connected TV set. If the colour system of this unit is  
different from that of the TV set, the images can not be  
displayed normally on the screen. The default setting is  
PAL.  
You can use this function to play follow the program list  
you edit.  
Use  
/
/
/
keys to select the Title / Chapter.  
Select Add to add new chapter to the program list.  
Select Delete to delete chapter from the program list.  
Select Play to play the program list.  
MULTI  
If the connected TV is multi system, select this mode.  
The output format will change in accordance with the  
video signal of the disc.  
NTSC  
Select Done to save the changing.  
If the connected TV is NTSC system, select this mode. It  
will change the video signal of a PAL disc and output in  
NTSC format.  
PAL  
If the connected TV is PAL system, select this mode. It  
will change the video signal of a NTSC disc and output  
in PAL format. (Default setting)  
Warning:  
Do not change the setting unless you have a NTSC TV set  
imported from other countries.  
11  
 
Basic Setup  
Setting the language  
Setting the Parental  
This function allows to set playback limitation level. Playing  
some DVD discs can be limited depending on the age of the  
user.  
This is to select the audio language, subtitle language and  
the language used on TV screen menus or DVD menus that  
will always be used for every disc to be played. The default  
setting is ENGLISH.  
Explanation of Ratings Limits  
The Rating Limits feature lets you determine what types of  
discs can be played in the player, and what types of discs will  
require a password to override the rating limit that you’ve  
set. In the United States of America (USA), the ratings  
feature is based on the ratings set up by the MPAA (Motion  
Pictures Association of America) such as R, PG, G, etc. Some  
countries use a different rating system.  
The system ranks the ratings from 1 to 8 in order to accom-  
modate the ratings systems used in other countries (1 is  
considered material that is least offensive and 8 is consid-  
ered the most offensive).  
Note:  
In order for the Ratings Limits to be enforced, the DVD  
Player must be locked and the disc you’re playing must  
contain a movie (or a title) that is rated.  
AUDIO: Select the desired audio language.  
SUBTITLE: Select the desired subtitle language  
DISC MENU: Select the desired disc menu language.  
Lock setup  
Reset as Default  
Select the RESET and press OK, all settings in DVD/CD mode  
will be reset to default setting.  
Lock player/Unlock player  
If you choose Lock player, you have to input the pass-  
word you set before enter the Lock setup menu the next  
time. Choose Unlock player to exit Lock player mode.  
Change password  
To change password, you should Lock player first.  
Note:  
If you forget the NEW password  
• Input the default password 3308 to enter the Lock setup  
menu.  
• Choose Unlock player  
• Go to Lock player and enter your new code.  
12  
 
Playing Discs  
General operation  
1 When you complete all the connections, plug the AC  
Using the menu for different types  
of discs  
Using the On-screen banner display  
EN  
power cord of the player and subwoofer.  
2 Press STANDBY/ON to switch on the main power.  
Audio  
Playmode  
Angle  
Title  
3 Press SOURCE to select the input source.  
Subtitles  
Chapter  
Time Display  
4 Press OPEN/CLOSE to open the disc tray, press again  
to close the disc tray.  
5 Press VOL +/- to increase or decrease the volume level.  
6 Press MUTE to shut off the sound. To restore the  
volume, press it again.  
1 Press INFO while playing a DVD disc.  
The on-screen banner display appears on the TV screen.  
Basic playback  
Start playback  
2 Use the  
/
buttons to select the item you want to  
Press PLAY / PAUSE ll on the front panel.  
change. And use the  
tings.  
/
buttons to change the set-  
To interrupt playback, press ll again .  
Depending on the disc, you can use the number buttons  
(0~9) to select the item.  
Note  
Some discs will start playing automatically, and others  
will display the menu on the TV screen. Use the  
to select the track, or press the number keys  
(0~9) to go to the desired track/chapter.  
/
/
3 Use the number buttons (0~9) to input the time you  
/
want to access.  
4 Press INFO again to exit.  
Stop playback  
Press STOP  
.
Time Display (all Info Display)  
This feature displays the elapsed time during playback. For  
DVD discs, the time displayed refers to the current title and  
acts as a Time Search feature. You can skip right to any  
scene.  
Skip to another track/chapter  
Press l  
/
l repeatedly during playback to skip to  
next or previous track/chapter.  
Highlight the Time Display, and use the number buttons on  
the remote to enter the elapsed time you want to go to.  
You must use two digits for each field. For example, if you  
enter 01: 35: 12, playback will start at 1 hour, 35 minutes,  
and 12 seconds.  
Fast search  
For DVD / mp3 discs  
FF(fast forward) : FF 2x, FF 4x, FF 6x, FF 8x.  
FR(fast reverse) : FR 2x, FR 4x, FR 6x, FR 8x.  
For Audio CDs, the time displayed refers to the track that’s  
playing.  
For VCD / CD discs  
FF(fast forward) : FF 1x, FF 2x, FF 3x, FF 4x.  
FR(fast reverse) : FR 1x, FR 2x, FR 3x, FR 4x.  
Title/ Track Icon (all Info Displays)  
Some DVD discs contain more than one title. Each title is  
divided into chapters. CDs are divided into separate tracks.  
To select a title/ track: After you highlight the Title/ Track  
icon, use the number button(s) on the remote to enter the  
To resume normal playback, press PLAY  
.
title number (track number) and press OK, or press the  
/
buttons to scroll through the titles / tracks.  
Note:  
Many discs only have one title.  
13  
 
Playing Discs  
Subtitles Icon (DVD Info Display)  
By default, subtitles are off. To turn subtitles on:  
Play Mode Icon (DVD, CD Info Displays)  
The Play Mode options available depend upon the type of  
disc you’re playing. The default play mode (standard play)  
plays the disc’s contents in the order in which the disc was  
created (i. e., track 1 plays first, followed by track 2, etc.)  
1
While a disc is playing, press INFO (the Info Display  
appears).  
2
3
Use the button to scroll to the Subtitle icon.  
To change the subtitle language, press the  
Repeat  
/
button  
By default the Repeat feature is Off. The options available  
depend upon the type of disc you’re playing.  
• With DVD discs you can repeat the title, chapter or use AB  
repeat.  
repeatedly to see what subtitle languages are available (the  
subtitle language options appear in the box at the bottom  
of the Info Display).  
4
Press OK.  
• With Audio CDs you can repeat the disc, a track, or create  
a program that plays repeatedly.  
Note:  
Changing the subtitle language with the Info Display will  
only affect the disc you are currently playing. When the disc  
is removed or the player is turned off, the subtitle language  
will revert to the language setting specified through the  
DVD player’s main menu.  
Repeating Discs, Titles, Chapters, or Tracks  
1
While a disc is playing, press INFO (the Info Display  
appears).  
2
Press the button until the Play Mode icon is high-  
If the disc doesn’t contain the language you select, the disc’s  
default language is automatically selected.  
lighted.  
3
Press the  
/
button to scroll through the different  
Some discs are programmed to allow access to the subtitle  
feature through the disc’s menu only. During playback, press  
MENU to access the disc’s menu.  
options until you see the repeat option you want to use (the  
options appear at the bottom of the Info Display). Press OK  
to select and activate.  
4
To turn off the Repeat feature, press the  
/
button  
Audio Language Icon (DVD Info Display)  
If the disc was created with different language tracks  
(recorded in different languages), you can change the  
language while you’re playing the disc.  
repeatedly until Play Mode: Repeat Off appears.  
Camera Angle Icon (DVD Info Display)  
Some discs contain multiple angles of a particular scene. If  
the disc has only one angle, this feature won’t work.  
1
While a disc is playing, press INFO (the Info Display  
appears).  
1
While a disc is playing, press ANGLE on the remote. If  
2
3
Press the button until the Audio icon is highlighted.  
Press the button on the remote to scroll through the  
the disc wasn’t created with multiple angles, (the invalid  
symbol) appears. If the disc contains multiple angles, the  
Angle icon appears with the current angle number and the  
number of angles available. For example, 1/ 4 indicates  
that Angle 1 is displayed and there are 4 different angles  
available.  
available audio languages.  
When the language you want to use is highlighted, press  
4
the OK button (the dialogue plays in the language you  
selected).  
2
Press ANGLE again to go to the second camera angle.  
Press ANGLE again to go to the third angle, etc.  
To resume normal playback, scroll through the camera  
Note:  
The language feature only works if the disc was created  
with multiple language tracks. If the disc doesn’t contain the  
language you selected, the disc will play in the  
default language.  
When you choose an audio language during disc playback,  
you only override the audio language setting in the DVD  
Player’s main menu temporarily.  
3
angles until you get to Angle Off .  
Picture Zooming  
This function allows you to enlarge the picture on the TV  
screen and to pan through the enlarged image.  
The audio language can also be changed through the DVD  
player menu. During playback, press MENU to access the  
disc’s menu.  
1 Press ZOOM repeatedly to select a zoom factor as below:  
Changes as Play, Zoom x 1.5, Zoom x 2, Zoom x 3 cyclically.  
2 To pan though the enlarged image, press  
/
/
/
to  
move the zoomed picture left, right, up or down.  
14  
 
Playing Discs  
Playing mp3 music files and displaying  
JPEG files  
mp3 recommendation  
• Use .mp3 as the extension when converting audio files  
into mp3 for saving onto CD-R(W) or CD-ROM, e.g.  
Rocky08.mp3. Do not use any other extension e.g. .doc, .pdf.  
• Do not use the .mp3 extension for other text or non-audio  
data files as this may result in serious malfunction and  
harmful noise interference.  
EN  
This unit is able to play mp3 files and view JPEG image files.  
Please read the following for detailed procedures.  
1
2
3
Open the tray by pressing OPEN•CLOSE.  
Place the disc with the printed side facing up.  
If the AutoPlay option in the Play Mode menu is enabled,  
• Most commonly available CD creation software can make  
files compatible for the system but do not forget to finalize  
your disc after creation. This set cannot read DirectCD  
recordings.  
•In order to get audio CD quality, you need to record your  
mp3 CD at 128 kbps. You can record up to 256 kbps. Beyond  
256 kbps, the unit might not read the CD.  
• Do not combine CD Audio and mp3 tracks onto a CD-R(W)  
or CD-ROM. The player will only playback CD audio tracks  
from mixed CD formats.  
the disc’s contents are displayed, otherwise press PLAY to  
display them.  
4
Select a folder using the  
/
/
/
buttons on the  
remote control, then press OK to display the list of files or  
press PLAY to start playing all the files contained in the  
folder.  
5
Select a file using the  
then press PLAY to start playback.  
To display the Info menu, press INFO when playback is  
stopped.  
/
/
/
buttons in stop mode,  
6
SMART NAVI  
..  
..  
PHIL COLLIN  
1
BUT SERIOUS  
MP3  
MP3  
MP3  
MP3  
MP3  
PHIL COLLIN  
PHIL COLLIN  
2
3
PHIL COLLIN  
PHIL COLLIN  
4
5
PLAYMODE  
NORMAL  
7
When the player has played all the music or JPEG files,  
the disc’s contents appear.  
Press STOP to end playback at any time.  
8
* mp3 file: use the  
/
buttons to select folder/file/  
playmode in the SMART NAVI menu, then use the  
/
buttons to choose your desired folder/file/playmode.  
* mp3 playmode: there are 5 playmodes totally such as  
Normal, Disc Repeat, Folder, Folder Repeat and Track.  
* JPEG file: During the slide show you can use ZOOM to  
magnify the picture and then press  
image.  
/
/
/
to pan the  
Note:  
The time taken for the contents of the disc to be displayed  
varies according to the size and number of JPEG files on the  
disc. If nothing is displayed after a few minutes, it is likely  
that certain files are too large. Try reducing the files’ resolu-  
tion and write another disc.  
Before inserting a disc, check that it is compatible with the  
player.  
15  
 
Playing Discs  
Using the VCD menu  
Playing Video CD with PBC  
When playing Video CDs (Version 2.0) with PBC functions,  
you can enjoy simple interactive operations, operations  
with search functions, etc.  
PBC playback allows you to play Video CD interactively,  
following the menu on the TV screen.  
1 Press INFO to set PBC function on.  
1 Press INFO while playing a VCD.  
2 Start playing a Video CD with PBC functions, the system  
will enter PBC playback automatically. The menu appears  
on the TV screen.  
The VCD menu appears on the TV screen. The contents  
of the menu vary from disc to disc.  
2 Use the  
/
buttons to select the item you want to  
3 Use the number keys (0~9) to select the item you want.  
For some discs, you can only select the items using the  
number buttons.  
change. And use the  
tings.  
Depending on the disc, you can use the number buttons  
/
buttons to change the set-  
(0~9) to select the item.  
4 Press OK to execute your selection.  
3 Press INFO again to exit.  
5 Follow the instructions on the menu screen for interac-  
tive operations.  
Item 1: Select VCD Track  
Refer to the instructions supplied with the disc, as the  
operating procedure may differ according to the Video  
CD.  
Use the  
/
buttons to select the track you want to play.  
Depending on the disc, you can use the number buttons  
(0~9) to select the track.  
Note  
To go back to the menu screen  
Press RETURN to go to the main menu when PBC on.  
Press STOP when playing a VCD disc with PBC on/off.  
This function is not available when at PBC ON mode.  
Item 2: Set PBC ON/OFF  
Use the  
/
buttons to set PBC ON/OFF  
To cancel PBC playback function and play a Video CD  
with PBC functions in Continuous Play mode.  
Item 3: Select VCD Audio Channel  
Use the  
Press INFO and set PBC OFF. If a disc is playing, the  
playback will not stop.  
/
buttons to select Audio Channel, the options  
are: Stereo, Mono right, Mono left.  
In SVCD mode, press AUDIO to toggle 4 different audio  
channels (if available).  
Press PLAY to start playing the disc in Continuous Play  
mode.  
16  
 
Playing Discs  
Using the CD menu  
Item 2: Select CD Program Mode  
Use the buttons to select CD Program Mode.  
Normal play: Plays tracks in normal order.  
Shuffle on: Plays tracks in random order.  
/
1
Press INFO while playing a CD.  
EN  
The CD menu appears on the TV screen. The contents of  
the menu vary from disc to disc.  
2
Use the  
change. And use the  
Depending on the disc, you can use the number buttons  
/
buttons to select the item you want to  
buttons to change the settings.  
Item 3: Repeat  
The repeat modes are: Repeat A-B, Repeat all, Repeat  
track and Repeat Off.  
/
(0~9) to select the item.  
Item 4: CD Intro Mode  
3
Press INFO again to exit.  
If you set this function on, it will play the front segments  
of each tracks for about 10 seconds, in order to give you  
a brief introduction of all the tracks.  
Item 1: Select CD Track  
Use the buttons to select the track you want to play.  
/
Depending on the disc, you can use the number buttons  
(0~9) to select the track.  
17  
 
Other Function  
Tuning to radio stations  
Listening to an external source  
1 Press POWER to switch on the system.  
Press SOURCE on the front panel to select AUX1 or AUX2  
or press AUX1/AUX2 on the remote directly.  
2 Press SOURCE repeatedly until “FM” or “AM” appears  
on the front panel display.  
You can press TUNER to select FM or AM directly.  
The last received station is tuned in.  
Sleep timer setting  
The sleep timer enables the system to switch to standby  
mode automatically at a preset time.  
3 Press and hold TUNER - ( ) or TUNER+ ( ) on the  
remote control or TUNING UP/DOWN on the front  
panel until the frequency indication starts to change.  
The system will search the station automatically.  
1 Press SLEEP repeatedly to select a preset time:  
120 (minutes)  
50 40  
110  
30  
100  
20  
90  
80  
00 (OFF)  
70  
120 ...  
60  
For manual tuning, press TUNER- ( ) or TUNER+ ( ) on  
the remote control or TUNING UP/DOWN on the front  
panel repeatedly.  
10  
To cancel the sleep timer  
Presetting radio stations  
Press SLEEP repeatedly until “0FF” appears.  
You can preset up to 40 stations for FM or AM.  
1 Tune to your desired radio station.  
2
3
4
Press MENU, “PROG” will flash on display.  
Press UP/DOWN to select a preset station.  
Press OK to store the station.  
5 To preset another stations, repeat steps 1-4.  
Listening to preset radio stations  
1 In tuner mode, press PR+/- or number keys (0~9) to  
select the desired preset stations.  
Tuning to a RDS station  
RDS stations broadcast on FM only.  
1 Follow steps under “Tuning to a Station” to tune  
to the desired radio station or follow steps under  
“Using Presets” to tune to a preset station.  
2
If RDS station is found, station name will show on the  
display.  
Displaying RDS Station Information  
Press INFO.RDS on the remote to display the frequency and  
station name (PS).  
18  
 
Troubleshooting  
If you experience any of the following difficulties while  
using the system, use this troubleshooting guide to help you  
remedy the problem. Should any problem persist, consult  
your nearest service center.  
Severe hum or noise is heard  
Check that the speakers and components are connected  
securely.  
EN  
Check that the connecting cords are away from a  
transformer or motor, and at least 3 meters away from a  
TV set or fluorescent light.  
No power  
Is the power cord firmly plugged into the power outlet?  
One of the safety mechanisms may be operating. In this  
event, unplug the player from the power outlet briefly  
and then plug it in again.  
Move your TV away from the audio components.  
The plugs and jacks are dirty. Wipe them with a cloth  
slightly moistened with alcohol.  
Clear the disc.  
No picture  
The sound loses stereo effect when you play a Video  
CD or a CD  
Check that the system is connected securely.  
The video connecting cord is damaged. Replace it with a  
new one.  
Set the Audio mode to “STEREO” in the SETUP menu.  
Make sure you connect the system appropriately.  
Make sure you connect the system to video input connec-  
tor on the TV.  
The surround effect is difficult to hear when you are  
playing a Dolby Digital sound track  
Make sure you turn on the TV.  
Make sure you select the video input on the TV so that  
you can view the pictures from this system.  
Check the speaker connections.  
Depending on the DVD disc, the output signal may not  
be the entire 5.1 channel but monaural or stereo even if  
the sound track is recorded in Dolby Digital format.  
The picture noise appears  
Clear the disc.  
If video from this system has to go through your VCR to  
get to your TV, the copy protection applied to some DVD  
programs could affect picture quality. If you still experi-  
ence problems after checking your connections, please  
try connecting your DVD system directly to your TV’s S-  
Video input, if your TV is equipped with this input.  
The sound comes from the center speaker only  
Depending on the disc, the sound may come from the  
center speaker only.  
No sound is heard from the center speaker  
You may set the listening mode to Dolby Pro Logic  
Phantom.  
The aspect ratio of the screen cannot be changed even  
though you set “TV DISPLAY” in the SETUP menu when you  
play a wide picture.  
Adjust the speaker volume.  
No sound or only a very low-level sound is heard  
from the rear speakers  
The aspect rate is fixed on your DVD disc.  
If you connect the system with the S-Video cable, connect  
directly to the TV. Otherwise, you may not change the  
aspect rate.  
Adjust the speaker volume.  
Depending on the TV, you may not change the aspect  
rate.  
The language for the subtitles cannot be changed  
when you play a DVD  
Multilingual subtitles are not recorded on the DVD.  
Changing the language for the subtitles is prohibited on  
the DVD.  
There is no sound or only a very low-level sound is  
heard.  
Check that the speakers and components are connected  
securely.  
Make sure that you have selected the correct source on  
the system.  
The protective device on the system has been activated  
because of a short circuit. Turn off the system, eliminate  
the short-circuit problem and turn on the power again.  
The audio connecting cord is damaged. Replace it with a  
new one.  
The system is in pause mode or in slow-motion play  
mode, or fast forward or fast reverse is performed. Press  
PLAY to return to normal play mode.  
Check the speaker settings  
The subtitles cannot be turned off when you play a  
DVD  
Depending on the DVD, you may not be able to turn the  
subtitles off.  
The angles cannot be changed when you play a DVD  
Multi-angles are not recorded on the DVD.  
Change the angles when the angle mark appears on the  
TV screen.  
Changing the angles is prohibited on the DVD.  
The system does not operate properly  
Static electricity, etc., may affect the system’s operation.  
Press the STANDBY/ON button to turn off, then press  
again to turn on. Or you can try to unplug the power  
cord and plug it on again.  
The left and right sounds are unbalanced or reversed  
Check that the speakers and components are connected  
correctly and securely.  
Adjust front balance parameter using SELECT and  
VOLUME +/-.  
19  
 
Specifications  
Tuner section  
Tuning range ................................................................................................................... FM 87.5 - 108 MHz (0.0.5MHz steps)  
......................................................................................................................................... AM 522 - 1620 kHz ( 9 kHz steps)  
Amplifier section  
Output power ................................................................................................................. 5 x 50 W / each channel  
Total harmonic distortion............................................................................................... 10% at rated power (1 kHz)  
Stereo power................................................................................................................... 2 x 60W, 2 channel driven at  
10%THD, 6 ohms, 1kHz  
2 x 45W, 2 channel driven at  
1%THD, 6 ohms, 1kHz  
Subwoofer power ........................................................................................................... 1 x 60W, at 10%THD, 6 ohms, 100Hz  
Frequency response ........................................................................................................ 30 Hz - 20 kHz  
Signal-to-Noise ratio ....................................................................................................... > 65 dB (CCIR)  
General  
Power supply ................................................................................................................... 230V / 50 Hz  
Power consumption ........................................................................................................ 105 W  
Dimension ....................................................................................................................... 6cmH x 43cm W x 35cm D  
Speaker  
System.............................................................................................................................. 1-way shielded  
Impendance..................................................................................................................... 6 ohm, subwoofer 6 ohm  
Dimension ....................................................................................................................... 18cm H x 9.9cm W x 8.1cm D  
Specifications subject to change without prior notice  
20  
 
Care and Maintenance  
Disconnect the audio system from the power source before  
performing any maintenance.  
Transportation information  
• Unplug the unit when the STANDBY LED is on while in  
STANDBY mode.  
EN  
Cleaning  
Clean the exterior of the system using a soft dust cloth.  
Safety precautions  
• Never open the cabinet under any circumstances. Any  
repairs or internal adjustments should be made only by a  
trained technician.  
• Never operate this product with the cabinet removed.  
• Do not touch the player with wet hands. If any liquid  
enters the player cabinet, take the player to a trained  
technician for inspection.  
The player  
CAUTION! This system operates with a laser. It must only be  
opened by a qualified technician.  
• Never move the player during playback.  
• Never put more than one disc on a tray or put a disc  
slipping out of the guide area.  
• This player uses a laser to read the data on the disc. The  
laser mechanism corresponds to the cartridge and stylus of a  
record player. Although this product incorporates a laser  
pick-up lens, it is completely safe when operated according  
to directions.  
Handling discs  
• Do not touch the  
n
signal surfaces.  
d
o
• Hold discs by the  
edges, or by one edge  
and the hole.  
• Discs rotate at high speed inside the player. Do not use  
damaged, warped, or cracked discs.  
• Do not touch the pick-up lens which is located inside the  
disc compartment. Also, to keep dust from collecting on the  
pick-up lens do not leave the compartment door open for  
an extended period of time. If the lens becomes dirty, clean  
it with a soft brush, or use an air blower brush designed for  
camera lenses.  
• The apparatus shall not be exposed to dripping or splash-  
ing and that no objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
• Do not affix labels or adhesive tapes to the label surfaces.  
• Do not scratch or damage the label. Discs rotate at high  
speeds inside the player.  
• Do not use damaged (cracked or warped) discs.  
Cleaning discs  
• Dirty discs can cause poor  
sound and visual quality.  
Always keep discs clean by  
wiping them gently with a  
soft cloth from the inner  
Headset safety  
• Do not play your headset while the sound is at high  
volume levels. Hearing experts warn against extended high-  
volume play.  
• If you experience a ringing in your ears, reduce volume or  
discontinue use.  
You should use extreme caution or temporarily discontinue  
use in potentially hazardous situations.  
• Even if your headset is an open-air type designed to let  
you hear outside sounds, don’t turn up the volume so high  
that you are unable to hear what is around you.  
edge toward the outer  
perimeter. Never wipe the disc in a circular motion since  
circular scratches are likely to occur and could cause noise  
during playback.  
• If a disc becomes dirty, wet a soft cloth in water, wring it  
out well, wipe the dirt away gently, and then remove any  
water drops with a dry cloth.  
• Do not use record cleaning sprays or antistatic agents on  
discs. Also, never clean discs with benzene, thinner, or other  
volatile solvents which may cause damage to disc surface  
Don’t infringe  
Disc lens care  
This product should only be used for the purposes for which  
it is sold, that is, entertainment, violating no copyright law.  
Any attempts to use this product for which it is not intended  
is unlawful and therefore not condoned by Thomson.  
• When your disc lens gets dirty it can also cause the system  
to output poor sound and visual quality. To clean the lens  
you will need to purchase a disc lens cleaner which can  
maintain the output sound and visual quality of your  
system. For instructions on cleaning the disc lens, refer to  
the ones accompanying the lens cleaner.  
Important battery information  
• Remove the batteries to avoid leakage if you do not use  
your remote control for more than one month.  
• Discard leaky batteries immediately as leaking batteries  
may cause skin burns or other personal injuries.  
• Dispose of batteries in the proper manner, according to  
provincial and local regulations.  
• Any battery may leak electrolyte if mixed with a different  
battery type, if inserted incorrectly, if all batteries are not  
replaced at the same time, if disposed of in fire, or if an  
attempt is made to charge a battery not intended to be  
recharged.  
The descriptions and characteristics given in this document are given as a general  
indication and not as a guarantee. In order to provide the highest quality product  
possible, we reserve the right to make any improvement or modification without prior  
notice. The English version serves as the final reference on all products and operational  
details should any discrepancies arise in other languages.  
21  
 

Teledex Cordless Telephone Cordless Handset User Manual
Top Innovations Vacuum Cleaner SF 226 User Manual
Toyota Automobile 2009 Yaris Sedan User Manual
Tricity Bendix Washer AW1002 W User Manual
True Manufacturing Company Freezer TDC 47 User Manual
Uniden Cordless Telephone WDSS 5355 User Manual
Velodyne Acoustics Speaker SPL 800i User Manual
Viking Range F20637D User Manual
VistaQuest Scanner VQ Scan User Manual
Watlow Electric Electric Heater 316 42 5 1 User Manual