Technicolor Thomson Flat Panel Television 20LW052 User Manual

TABLE OF CONTENTS  
IMPORTANT INFORMATION ---------------------------------------------2  
Safety-------------------------------------------------------------------------2  
LCD panel-------------------------------------------------------------------2  
Care---------------------------------------------------------------------------3  
SWITCHING ON ----------------------------------------------------------------4  
OPERATING INSTRUCTION------------------------------------------------6  
Remote control -------------------------------------------------------------6  
Teletext ----------------------------------------------------------------------7  
Menus ------------------------------------------------------------------------8  
Main menu ------------------------------------------------------------------8  
Picture adjustments--------------------------------------------------8  
Audio adjustments---------------------------------------------------9  
PIP/PAP adjustments---------------------------------------------- 10  
Channels search ----------------------------------------------------11  
Input selection------------------------------------------------------13  
Setup -----------------------------------------------------------------14  
PC mode -------------------------------------------------------------------15  
Controls--------------------------------------------------------------------16  
Connections --------------------------------------------------------------16  
AV sockets----------------------------------------------------------17  
Headphone socket -------------------------------------------------18  
HDMI socket -------------------------------------------------------18  
PC IN socket--------------------------------------------------------19  
BEFORE CALLING SERVICE---------------------------------------------20  
This manual applies to several TV set models. Some features may not be available  
on the model you purchased.  
Optional functions are indicated by the following symbol:  
Thank you very much for choosing the LCD TV.  
We recommend that you take a few minutes to read carefully through this manual  
before installing and switching on the TV. Please keep this manual in a safe place for  
your future reference.  
1
 
Care  
Use a glass-cleaning product to clean the screen and a soft cloth and mild detergent to  
clean the rest of the set.  
Important: Using strong detergents, alcohol-based and abrasive products may  
damage the screen.  
Dust the vents at the back and sides regularly. Using solvents, abrasive or alcohol-  
based products could damage the TV set.  
Never open the appliance yourself since this may put you at risk or damage the  
appliance.  
End of life directives  
This symbol means that your inoperative electronic appliance must  
be collected separately and not mixed with the household waste.  
The European Union has a implemented a specific collection and  
recycling system for which producers' are responsible.  
This appliance has been designed and manufactured with high  
quality materials and components that can be recycled and reused.  
Electrical and electronic appliances are liable to contain parts that  
are necessary in order for the system to work properly but which  
can become a health and environmental hazard if they are not  
handled or disposed of in the proper way. Consequently, please do  
not throw out your inoperative appliance with the household  
waste.  
If you are the owner of the appliance, you must deposit it at the  
appropriate local collection point or leave it with the vendor when  
buying a new appliance.  
- If you are a professional user, please follow your supplier's  
instructions.  
- If the appliance is rented to you or left in your care, please  
contact your service provider.  
Help us protect the environment in which we live !  
Before setting up your television set, make sure that the surface you want to put  
the set on can support its weight  
Don’t place the set on an unstable surface (e.g. moving shelf, very edge of a  
unit) and make sure that the front of the television set does not overhang the  
surface it is sitting on.  
The manufacturer disclaims any liability if the TV set is not used in accordance  
with this manual.  
3
 
SWITCHING ON  
Follow the instructions on this page on how to switch on your TV set and the remote  
control before going on to following pages describing how to use the remote control  
and the channel set-up procedure.  
1. Place the TV on a solid surface.  
2. Insert the aerial plug firmly into the aerial socket ANT at the back of the TV.  
The aerial socket (75 Ohms - VHF / UHF / cable) can be used for connecting an  
external aerial or other equipment fitted with a modulator (video recorder, satellite  
receiver, etc.).  
We recommend that you do not connect other equipment (video recorder, satellite  
receiver, etc.) to your TV set to begin with, so as not to complicate the set-up  
procedure with the additional steps involved. Connect them when you have finished  
setting up the channels by referring to page 16 of this manual.  
4
 
3. Remote control:  
Remove the cover of the battery compartment.  
Insert the 2 batteries supplied (Type AAA 1.5V).  
Please respect the environment and the relevant regulations. Before you  
dispose of batteries (or accumulators), ask your dealer whether they  
require special recycling and if he is able to take them back.  
and if he is able to take them back  
Precautions on using batteries:  
- Only use the battery types specified.  
- Make sure you use the correct polarity.  
- Do not mix new and used batteries.  
- Do not use rechargeable batteries.  
- Do not expose batteries to excessive heat, throw them in a fire, recharge them or try to open  
them, as this could cause them to leak or explode.  
- Remove the batteries from the remote control if you are not using it for a long period of time  
(several weeks).  
4. Power :  
Connect the female plug of the power cord to AC IN power input at the back of  
the set.  
Then connect the male plug of the power cord to the wall outlet  
Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply.  
It must not be connected to a DC supply. If the plug is damaged, do not, under any  
circumstances, connect it to a mains socket, as there is a risk of electric shock.  
5. Turn the TV on:  
Press the On/standby button at the topside or on the front of the TV to turn it on,  
the indicator in front turns green.  
When TV set is in stand-by mode, the indicator in front of the TV illuminates amber.  
MORE INFO  
RC 311TR1 operate most DVD players and recent video recorders made by Thomson, Saba,  
Brandt, Ferguson and Telefunken (refer to page 6).  
5
 
OPERATING INSTRUCTION  
Remote Control  
Press this key to display :  
- the channel number when  
watching a TV program.  
- the input source when  
watching an AV program.  
Press this key to turn on or  
on stand-by the TV set.  
PR  
Press PR+ or PR– to scroll  
through the channels.  
Press this key to mute  
the sound.  
Press this key again to  
restore it.  
Press + or – to increase or  
decrease the volume.  
0~9 DIGIT BUTTONS  
To select a TV channel.  
Press this key to adjust the  
automatic shut-off time  
(from 0 to 120 minutes).  
Each key press increase  
this time 15 minutes.  
The timer begins to count  
down from the number of  
minutes selected after the  
display has disappeared.  
RETURN  
Press this key to return to  
previously selected TV  
channel or return to  
previously selected input  
source.  
AV  
Press this key to return last  
AV or press repeatedly to  
select desired input source  
Press this key to swap main  
picture and small picture  
when PIP is working.  
Press this key to select  
sound type (Mono, Stereo  
or Dual if broadcasted by  
the TV channel).  
Press this key to  
display PIP/PAP  
screen  
Zoom +,-  
MENU  
Press this key to  
display main menu.  
Press these key to select  
desired picture format (4:3,  
14:9, CINERAMA, 16:9)  
Press this key to  
EXIT  
adjust PIP size when  
Press this key to exit  
TV: To access TV mode  
Press this button to control the  
television  
PIP is working.  
main menu  
Teletext function and buttons will describe on  
next page.  
DVD: To access DVD mode.  
VCR: To access VCR mode  
6
 
TELETEXT  
The Teletext service is available in many countries under a variety of names (TOP Text,  
Fastext, FLOF text,Videotext). It is provided as a free service by television  
broadcasters.This service provides a real wealth of information, available at any time, on  
weather, sports results, news, games, etc.The information is presented in pages or  
organised in topics specified in colour on the screen and you can access this information by  
simply pressing the buttons of the relevant colour on the remote control.  
TEXT  
Press this key, Teletext will display the last page selected,  
or if you have changed channel, the index page (usually  
100).  
OK  
Press this key to superimpose the teletext over the TV  
picture. A 2nd key press displays the teletext in the left part  
of the screen. Press again to return to Teletext mode.  
Press this key, once to zoom in on the top part of the  
screen, a second time to zoom in on the bottom part of  
the screen and a third time to return to normal display.  
RED / GREEN / YELLOW / BLUE  
If Fastext is available, use coloured keys to access  
directly to the relevant colour topics.  
Press this key to select subtitle page.  
If the displayed page is not the subtitle one, search its  
number in the index page and select it.  
STOP  
Press this key to stop the page scrolling. Press it again  
to restart the page scrolling.  
(?)  
Press this key to reveal a hidden answer (for example, in  
games). Press it again to hide the answer.  
.
Page can be selected in two ways.  
a. Press or to increase or decrease the page number by one..  
b. By entering the page number, using digit buttons 0~9.  
SUBPAGE ACCESS  
Some information is spread across more than one page. To access sub-pages, press ---- /  
AV key then enter the sub-page number using digit buttons 0~9.  
7
 
MENUS  
MAIN MENU  
Press the MENU button to display the Main menu. It offers the following options :  
Picture adjustments, Audio adjustments, PIP/POP adjustments, TV channels search  
menu (only in TV mode) and PC adjustments (only in PC mode). It also allows to  
define your preferences in the Setup menu.  
PICTURE ADJUSTMENTS  
Display the Main menu by pressing MENU  
button.  
Select the Picture menu using the /   
buttons.  
Press the OK button to confirm.  
Use the / buttons to select each option.  
Preset: choose between Personal, Vivid, Standard or Mild.  
Personal gives access to following adjustments.  
Contrast, Brightness, Colour and Sharpness: adjust these settings as required using  
the / buttons.  
Tint: This option is only available for NTSC audio-visual sources.  
Adjust the tint of the picture using the / buttons.  
Reset: Return to default settings. Press OK button to return to default settings.  
Press the EXIT button to exit the Picture menu.  
Note : this menu is removed automatically after a few seconds without using the  
remote control.  
When you adjust a menu option (Contrast for  
example), the menu is replaced by a sub-menu as  
illustrated. Press the OK button to return to the  
Picture menu.  
8
 
AUDIO ADJUSTMENTS  
Display the Main menu by pressing MENU  
button.  
Select the Sound menu using the button.  
Press the OK button to confirm.  
Use the / buttons to select each option.  
Volume : adjust as required using the / buttons.  
Balance : adjust the balance between left/right channels as required using the /   
buttons.  
Bass : adjust the bass level as required using the / buttons.  
Treble: adjust the treble level as required using the / buttons.  
SRS WOW : Using / , activate (On) or deactivate (Off) SRS function.  
SRS is an audio technology which improve the sound quality.  
Reset: Return to default settings. Press OK button to return to default settings.  
Press the EXIT button to exit the Sound menu.  
Note : this menu is removed automatically after a few seconds without using the  
remote control.  
When you adjust a menu option (Volume for  
example), the menu is replaced by a sub-menu  
as illustrated. Press the OK button to return to  
the Sound menu  
SRS WOW, SRS and are registered trademarks of SRS Labs, Inc.  
This product is designed using SRS technology with permission from SRS Labs, Inc.  
9
 
PIP/PAP ADJUSTMENTS  
Press the MENU button to display the Main  
menu  
Select the PIP menu using the button.  
Press the OK button to confirm.  
Use the / buttons to select each option.  
Dual mode: Using / buttons activate (PIP/PAP) or deactivate (Off) the PIP  
function.  
Following options are available if you have selected PIP or PAP at the PIP line.  
Position : use the / buttons to change the position of the PIP frame on the  
screen.  
Source : to select video source of the PIP/PAP, use the / buttons to select video  
source of the picture in the PIP/PAP frame (TV or AV).  
You can insert a TV picture while you are viewing an AV program or insert an AV  
picture while you are viewing a TV program.  
Video source can also be selected without the menu, using AV button on the remote  
control.  
Audio select : to select audio source: MAIN (Main picture) or SUB (PIP/PAP  
picture), use the / buttons to select audio source.  
Press the EXIT button to exit the PIP menu.  
Note : this menu is removed automatically after a few seconds without using the  
remote control.  
10  
 
CHANNELS SEARCH  
Channels search involves selecting all the settings required to be able to search for  
and store all the channels you can receive.  
Make sure that the television is switched on and follow all the steps in turn specified  
on this page.  
Display the Main menu by pressing MENU  
button.  
Select the Installation menu using the button.  
Press the OK button to confirm.  
Use the / buttons to select each option.  
Automatic set-up  
Select Auto. installation using the button.  
Press the OK button to display the Auto.  
installation menu.  
Use the / buttons to select each option.  
Country: Select the relevant country using the / buttons.  
This is the country you are in, or the country whose channels you want to receive if  
you live near its borders. If you do not find your country, select Auto.  
Start: Press OK button to start channels searching  
Manual set-up  
Select Man. installation using the button.  
Press the OK button to display the Man.  
installation menu.  
Use the / buttons to select each option.  
Prog. number: Allows to select the program on which you want save a new channel  
or a program you want to modify.  
-
Using the / buttons, select the program.  
Frequency : Allows to enter a specific frequency for tuning.  
Using the button, select the Frequency option and press the OK button.  
-
Using the 0~9 digit and / buttons, enter desire frequency and press the OK button.  
11  
 
Name : Allows to edit the channel name.  
-
-
-
Using the button, select the Name option.  
Using the button select the first letter field.  
By pressing the 0~9 digit repeatedly and using the following table select the first  
character.  
Repeat the procedure for each letter field.  
Press the OK button to confirm.  
BUTTON  
AVAILABLE CHARACTERS  
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
Space  
A
D
G
J
M
P
S
W
*
B
!
C
F
I
L
O
R
U
Y
@
#
$
%
^
&
V
Z
E
H
K
N
Q
T
X
#
(
)
Store prog.: Allows to Save a channel on a new Program N°, to Insert a channel on  
an already existing Program No (the channel previously saved on this program n° will  
be shifted to the upper program n°) or to Delete the Program No.  
-
Once a channel has been found and named, use the button to select the Store  
prog. option.  
-
Using the / buttons, select Save, Insert or Delete and press the OK button to  
confirm.  
Swap prog.: Allows to swap 2 programme numbers.  
-
-
-
-
-
-
Using the / buttons select the Prog. number option.  
Using the / buttons, select the program to be moved.  
Using the button, select the Swap prog. option.  
Using the button, enter the swap function.  
Using the the 0~9 digit, enter the new programme number (3 digits).  
Press the OK button to confirm, the programme numbers are swapped.  
Norm : Allows to change the audio norm.  
-
-
Using the button, select the Norm option.  
Using the / buttons, select the norm.  
Note: the following norms are available to choose from: I for the UK and Ireland, L/LP for  
France and Luxembourg, D/K for Eastern Europe, the Middle East and Asia, B/G for Western  
Europe, Australia and New Zealand.  
Skip : Allows to skip a channel.  
-
-
Using the button, select the Skip option.  
Using the / buttons, select On, the channel will be skip.  
Repeat this procedure to skip other channels.  
12  
 
Fine tuning : If the picture is not clear, you can adjust the setting.  
-
-
Using the button, select the Fine Tuning option.  
Use the / buttons to find the good tuning point.  
Man. search : Allows to launch a manual search.  
-
Using the button, select the Man. search option.  
- Using the / buttons, start the search in decreasing or increasing order.  
The menu is replaced by a sub-menu showing the progression of the search.  
-
The search will stop at the first channel found, Man. installation menu is  
displayed again (within 3 seconds).  
-
If you wish to memorise the channel, select Store Program option using button  
and proceed as indicated in previous page. Otherwise, continue the search using  
/ buttons.  
If you have modified Norm, Skip, Fine tuning options or if you have launch a  
Manual Search, select Store Prog. option using / buttons and proceed as  
indicated above to save your modification.  
Press the EXIT button to exit the PIP menu.  
INPUT SELECTION  
To select AV source:  
To select desire input source, press the AV button to  
display the selection menu.  
Use the / buttons to select each input sources.  
Press the OK button to display the desire input source.  
To select input source in PIP/PAP mode  
To select desire input source in PIP/PAP mode, press the  
AV button to display the selection menu.  
Use the / buttons to select either MP source (to  
modify Main picture source) or PIP source (to modify  
PIP source).  
Press the OK button to display the selection menu in PIP  
mode .  
Use the / buttons to select the input source.  
Press the OK button to display the desire input source.  
13  
 
SETUP  
This menu allows to select the language for the menus as well as the colour of the  
screen when there is no video input. It allows also to set an automatic shut-off time.  
Display the Main menu by pressing MENU  
button.  
Select the Options menu using the button.  
Press the OK button to confirm  
Use the / buttons to select each option.  
Menu language : To select the language for the menus.  
Menu timeout : To set an automatic shut-off time for Menu. Using / buttons  
select 5 > 10 > 20 > 30 > 40 > 50 seconds.  
Menu background : Select Opaque or Transparent type.  
Sleep Timer : To set an automatic shut-off time. Using / buttons select Off > 15  
> 30 > 45 > 60 > 90 > 120 minutes.  
Once the time is ended, TV set automatically switch on standby mode .  
If you turn the TV on standby mode after setting the sleep timer, setting will be  
erased. Set it again.  
Blue Screen : To have a blue screen when there is no video input or when the RF  
signal is very bad.  
Using the / buttons select On.  
Select Off if you do not want the blue screen.  
Teletext language: Using / buttons, select the character set that wil be used for  
Teletext on this channel.  
The following character sets are available: West Europe, East Europe, Cyrillic  
(Russia), Greek, Arabic, Persian,.  
The character set determines how characters are displayed on Teletext screen.  
Reset : Return to default settings. Press the OK button to return to default settings.  
Press the EXIT button to exit the Options menu.  
Note : this menu is removed automatically after a few seconds without using the  
remote control.  
Note : You can display the remaining time before the automatic shut-off. To do that,  
press the sleep button  
.
To cancel the automatic shut-off, press several times the sleep button  
display Sleep timer Off .  
to  
14  
 
PC MODE  
In PC mode, main menu is dfferent from the one in TV mode.  
Please select PC as main input.  
PC SETTINGS  
Display the Main menu by pressing MENU  
button.  
Select the PC menu using the button.  
Press the OK button to confirm.  
Use the / buttons to select each option.  
H. position : use the / buttons to move the picture horizontally on the screen.  
V. position : use the / buttons to move the picture vertically on the screen.  
Focus : Adjust as required to improve the picture quality.  
Auto adjust: this function is used to automatically adjust the VGA input. Press the   
/ buttons to start the adjustment process.  
Tone: to adjust the colour temperature at your convenience.  
Reset : Return to default settings. Press OK button to return to default settings.  
15  
 
CONTROLS  
Controls are located on the top of the TV set.  
button:  
Press this button to switch on or on standby the TV set.  
Press this button to display the main menu.  
MENU button:  
/ buttons: Press these buttons to select a channel or to choose an option in a  
menu.  
– / + buttons:  
Press these buttons to ajust the volume, access a sub-menu or  
perform an adjustment in a menu.  
Source button:  
To select desire input source, press the SOURCE button to  
display the selection menu.  
Use the / buttons to select each input sources.  
Press the – / + button to display the desire input source.  
CONNECTIONS  
Remove the back plate at the back of the TV as  
shown on the illustration opposite.  
Lay the LCD TV with the screen down on a  
table, as it will be easier to connect your  
peripheral equipment. Please take your  
precautions not to damage the screen.  
16  
 
AV sockets (Located at the back of the TV set, on the leftside)  
AV1 SCART socket  
To connect a VCR, a camcorder,  
a DVD player, a satellite receiver,  
a decoder or a games console.  
AV1 SCART socket is an input/output  
socket.  
Component Video CINCH sockets  
(CMP) (AV input)  
To connect a DVD player or set top  
box.  
Audio CINCH sockets  
(Component Audio input) (CMP)  
Shared Audio CINCH sockets  
(AV2,AV2-S) (Audio input)  
S-Video socket (AV2-S )  
(AV input)  
To connect an S-Video VCR or an  
S-Video camcorder.  
Video CINCH sockets (AV2)  
(AV input)  
To connect a VCR, a camcorder, a  
DVD player or a satellite receiver.  
To display images from the connected appliance, select the input source by pressing  
the AV button on the remote control (see page 13).  
For some appliances, connected to the SCART socket, this selection is made  
automatically.  
17  
 
HEADPHONE SOCKET (LOCATED AT THE BACK OF THE TV SET, ON THE RIGHTSIDE)  
When headphones are connected, the sound  
of TV set is cut.  
Adjust headphones volume level by using  
+ / - buttons on the remote control.  
To switch off the sound of the headphone  
press the  
button on the remote control.  
HDMI SOCKET (High-Definition Multimedia Interface)  
(LOCATED AT THE BACK OF THE TV SET, NEAR THE ANTENNA SOCKET)  
This socket allows the connection to all appliances fitted with an HDMI socket.  
The standard HDMI allows a digital transmisson of video and audio data using only  
one connector.  
It gives you the possibility to obtain very high quality images.  
In this case it is necessary to use an HDMI connecting cable.  
Make sure the appliance output is set to be HDMI output.  
To display images from the connected appliance, select the input source (HDMI) by  
pressing the AV button on the remote control.  
HDMI, the HDMI logo and "High-Definition Multimedia Interface" are trademarks or  
registered trademarks of HDMI Licensing LLC."  
18  
 
PC IN SOCKET (LOCATED AT THE BACK OF THE TV SET, NEAR THE POWER INPUT  
SOCKET)  
Allows to connect a PC to the TV set  
Connect the PC IN D-sub socket located at the back of the TV set to the output of PC  
equipment through a mini D-sub 15 pin cable (2).  
Connect the stereo PC IN audio jack located at the back of the TV set (near the D-sub  
socket) to the audio output socket on the computer through an audio cable.  
To display images from the connected appliance, select the input source (PC) by  
pressing the AV button on the remote control.  
19  
 
BEFORE CALLING SERVICE  
Please make these simple checks before calling service.  
Symptoms  
“ Ghost ” or double  
image  
Items to Check and Actions to follow  
* Make sure the antenna is facing the right direction..  
* This may be caused by obstruction to the antenna due  
to high rise buildings or hills.  
* Using a highly directional antenna may inprove the  
picture.  
No power  
No picture  
*Check that the TV’s AC power cord is plugged into the  
mains socket.  
*Unplug the TV, wait for 60 seconds. Then re-insert  
plug into the mains socket and turn on the TV again.  
* Check antenna connections at the rear of the TV to see  
if it is properly connected to the TV.  
* Possible broadcast station trouble. Try another  
channel.  
*Adjust the contrast and brightness settings.  
*Check there is not a wrong connection or a wrong  
input mode selection.  
Good picture but no  
sound  
*Increase the VOLUME.  
*Check that the TV is not muted; press the button on the  
remote control.  
*Adjust the contrast, color and brightness settings.  
Good sound but poor  
color  
Poor picture  
*Sometimes, poor picture quality occurs when having  
activated an S-VHS camera or camcorder connected  
and having connected another peripheral at the same  
time. In this case switch off one of the other  
peripherals  
Snowy picture and  
noise  
Horizontal dotted line  
*Check the antenna connection  
*This may be caused by electrical interference (e.g.  
hairdryer, nearby neon lights, etc.)  
*Turn off the equipment.  
Television not  
responding to remote  
control  
*Check whether the batteries are working. Replace if  
necessary  
*Clean the remote control sensor lens on the TV.  
*You can still use the buttons at the front of your TV.  
20  
 
Your guarantee  
UK and Ireland (GB + IE)  
Dear Customer,  
Thank you for purchasing this THOMSON product and for your confidence in our company.  
This product meets applicable safety requirements and has undergone stringent testing during  
manufacture.  
However, should there occur a defect, the product or its defective part(s) (excluding accessories  
and consumables, especially lamps of DLP rearprojectors) will be repaired free of charge (labour  
and parts) or, at THOMSON’s discretion, exchanged for a similar item, provided that it has been  
returned within 12 (twelve) months from the date of original purchase (date of receipt), is  
defective in materials and/or workmanship and has been bought in any of the following countries:  
FR, IT, ES, PT, GB, IE, DE, CH, AT, BE, LU, NL, PL, CZ, HU, SK (Territory) or in a Duty-  
free shop in the named countries.  
This guarantee will be granted only upon presentation of the original invoice or cash receipt,  
indicating the date of purchase and dealer’s name, and of this guarantee card with the product  
type and serial number. The benefits of this guarantee may be refused if the invoice, cash receipt  
or guarantee card has been altered in any way, deleted or made illegible after the original  
purchase.  
This guarantee does not apply to any of the following:  
1. Damage caused by accidents including, but not limited to, lightning, fire, water.  
2. Transport costs between the home and place of service and other costs and risks of transport  
relating directly or indirectly to this guarantee.  
3. Damage to the product resulting from neglect, misuse, including but not limited to, failure to  
use, repair and/or install the product for its normal domestic purposes and/or in accordance with  
the operating instructions on its proper installation and use, especially, referring to the user  
manual, burned screen provoked by the lengthy display of a fixed picture like broadcaster logo  
or 4x3 format  
4. Modifications, adaptations and alterations of the product to operate in a country other than  
that for which it was originally designed and manufactured, or any damage resulting from such  
modifications.  
5. Usage other than usual consumer home usage.  
6. Defects on individual pixels when the number of defective is below the following number:  
Dark pixels: 7  
Bright pixels: 3  
Total dark and bright: 8  
These statements do not affect your statutory rights as a consumer under applicable national  
legislation in force, nor your consumer’s rights against the dealer from whom you bought the  
product.  
If you need service, whether or not under guarantee, please approach the dealer who sold you the  
product.  
In your own interest we advise you to read the instruction booklet for your THOMSON product  
carefully before contacting your dealer or service center.  
If you need service while in a country (within the named Territory) other than the one where you  
bought your product, please contact the nearest THOMSON InfoCenter.  
Should you have any questions which your dealer is unable to answer, please contact:  
THOMSON InfoCenter (UK,IRL)  
Unit 1, Zone D  
Chelmsford Road  
Industrial Estate, Great Dunmow  
Essex CM6 1XG (England)  
tel. 0871 712 1312*  
*(0.1£ per minute call cost)  
21  
 

Tascam CD Player CD 500 500B User Manual
Technicolor Thomson Network Router 545 570 User Manual
Technika Clock Radio CR 114IPH User Manual
Toshiba DVD VCR Combo MW24FM1 User Manual
Toshiba Projection Television 62HM195 User Manual
Uniden Marine RADAR CXAI 5198 User Manual
Vermont Casting Ventilation Hood LHECDV20 User Manual
Vicks Humidifier V3500 User Manual
VTech Cordless Telephone IP811 User Manual
VTech Games Fly Learn Globe User Manual